Sol-gel tungsten oxide/titanium oxide multilayer nanoheterostructured thin films: structural and photoelectrochemical properties
No Thumbnail Available
Date
2007-12-20
Journal Title
Journal ISSN
Volume Title
Publisher
American Chemical Society
Abstract
Multilayer structures of alternating thin titanium and tungsten oxide layers having dimensions of similar to 20 nm have been fabricated from titanium alkoxide and various tungstate precursor solutions using the dip coating technique. Single, double, and triple layer titanate and tungstate thin films were deposited on silicon substrates, and these films were initially annealed at 400°C. Structural and microstructural aspects of the films were investigated using a variety of techniques, including X-ray reflectometry, grazing incidence X-ray absorption spectroscopy (GIXAS), cross-sectional transmission electron microscopy (TEM), and secondary ion mass spectrometry. The dimensions of the films and the character of the interfaces were principally gauged by cross-sectional TEM and X-ray reflectometery. All films were continuous on a local scale and had relatively low surface roughness. At the treatment temperature of 400°C, only the tungsten oxide component showed appreciable crystallinity. The multilayer films had relatively diffuse interfaces, even after annealing in air at this temperature. At these temperatures, easily measurable diffusion of tungsten into the titanium oxide component was observed, whereas the diffusion of titanium into the tungsten oxide component occurred to a lesser degree. At higher temperatures, interdiffusion of components was found to be significant. TEM, X-ray diffraction, and Ti K-edge GIXAS measurements indicated that annealing at 400°C generated films in which the titanate component remained amorphous while the tungstate component crystallized in the tetragonal modification Of WO3, which is normally stable only at high temperatures. Grazing incidence X-ray absorption spectroscopy allowed the degree of distortion of the tungsten oxygen polyhedra to be monitored as a function of depth into the film. The photoelectrochernical activity of the multilayer film electrodes was investigated, and the activity for water photo-oxidation was assessed. The photoelectrochernical response was greatest when crystalline WO3 was bounded on both sides by amorphous TiO2 layers. In this bounded state, WO3 had unique structural characteristics. © 2007, American Chemical Society
Description
Keywords
Absorption, Visible radiation, Optical properties, Hydrogen transfer, Titanium, Tungsten
Citation
Luca, V., Blackford, M. G., Finnie, K. S., Evans, P. J., James, M., Lindsay, M. J., Skyllas-Kazacos, M., & Barnes, P. R. F. (2007). Sol-gel tungsten oxide/titanium oxide multilayer nanoheterostructured thin films: structural and photoelectrochemical properties. Journal of Physical Chemistry C, 111(50), 18479-18492. doi:10.1021/jp0729112