Residual stresses in high strengths steel tubes for large scale infrastructure

Simple item page
dc.contributor.authorKhan, Men_AU
dc.contributor.authorMashiri, FRen_AU
dc.contributor.authorParadowska, AMen_AU
dc.contributor.authorUy, Ben_AU
dc.contributor.authorTao, Zen_AU
dc.date.accessioned2021-02-25T00:12:31Zen_AU
dc.date.available2021-02-25T00:12:31Zen_AU
dc.date.issued2012-11-07en_AU
dc.date.statistics2021-02-25en_AU
dc.descriptionNot available online. Conference Handbook is held by ANSTO Library at DDC 539.758/9.en_AU
dc.description.abstractRecently, a green star rating system was introduced in Australia to promote sustainability in the construction industry (Green Building Council of Australia, 2009). Steel and concrete are the two most widely used construction materials. Sustainability in civil engineering construction can be achieved by using high strength steels as well as high strength concrete. High strength quenched and tempered (QT) and Very High Strength Steels (VHS) and high strength concrete with reduced amounts of Ordinary Portland Cement (OPC) can be adopted. This project will therefore consider the behaviour of concrete filled steel columns using higher strength steels with higher strength concrete incorporating low percentages of OPQ. The characterisation of residual stresses in high strength steel is important in understanding the buckling strength of concrete filled columns. Previous research on local and post-local buckling has been addressed for mild structural steel by Uy (2000) and Uy (2001) and these approaches will be augmented by using high strength steel and high strength concrete. In this paper preliminary measurements of residual stresses on the Kowari strain scanner at ANSTO, within the high strength steel joints will be discussed and future research plans will be presented.en_AU
dc.identifier.citationKhan, M., Mashiri, F. R., Paradowska, A., Uy, B., & Tao, Z. (2012). Residual stresses in high strengths steel tubes for large scale infrastructure. Paper presented at the 10th AINSE-ANBUG Neutron Scattering Symposium (AANSS), Sydney, 7- 9 November 2012 (pp. 75)en_AU
dc.identifier.conferenceenddate9 November 2012en_AU
dc.identifier.conferencename10th AINSE-ANBUG Neutron Scattering Symposium (AANSS)en_AU
dc.identifier.conferenceplaceSydney, NSW, Australiaen_AU
dc.identifier.conferencestartdate7 November 2012en_AU
dc.identifier.pagination75en_AU
dc.identifier.urihttps://apo.ansto.gov.au/dspace/handle/10238/10435en_AU
dc.language.isoenen_AU
dc.publisherAustralian Institute of Nuclear Science and Engineering (AINSE)en_AU
dc.subjectBuilding codesen_AU
dc.subjectResidual stressesen_AU
dc.subjectConcretesen_AU
dc.subjectSteelsen_AU
dc.subjectSustainabilityen_AU
dc.subjectDeformationen_AU
dc.titleResidual stresses in high strengths steel tubes for large scale infrastructureen_AU
dc.typeConference Abstracten_AU
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
ANBUG 10- Paradowska.pdf
Size:
803.39 KB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Conference Publications