Fabrication of honeycomb-structured porous films from poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) via the breath figures method

dc.contributor.authorHuh, Men_AU
dc.contributor.authorJung, MHen_AU
dc.contributor.authorPark, YSen_AU
dc.contributor.authorKang, TBen_AU
dc.contributor.authorNah, Cen_AU
dc.contributor.authorRussell, RAen_AU
dc.contributor.authorHolden, PJen_AU
dc.contributor.authorYun, SIen_AU
dc.date.accessioned2024-02-22T22:32:54Zen_AU
dc.date.available2024-02-22T22:32:54Zen_AU
dc.date.issued2011-12-27en_AU
dc.date.statistics2024-02-19en_AU
dc.description.abstractFormation of porous films from poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) using the breath figures (BF) method was investigated by evaporating solutions in chloroform in humid air and examining film structure using optical and scanning electron microscopy (SEM). BF films were successfully fabricated from PHB (Mw = 486,000 g/mol) and displayed hexagonal arrays of pores, which varied in diameter (D = 7–2 μm) with solution concentrations (0.5–2.00%). SEM of fractured films also showed subsurface closed nano-pores (D = 500–700 nm). BF films cast from PHBV (5% HV) formed arrays with smaller pores and apparent surface defects. Differential scanning calorimetry showed that porous PHB and PHBV films produced using the BF method were more crystalline than nonporous solvent cast films of PHB and PHBV. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineersen_AU
dc.identifier.citationHuh, M., Jung, M.-H., Park, Y. S., Kang, T.-B., Nah, C., Russell, R. A., .Holden, P. J., & Yun, S. I. (2012). Fabrication of honeycomb‐structured porous films from poly (3‐hydroxybutyrate) and poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) via the breath figures method. Polymer Engineering & Science, 52(4), 920-926. doi:10.1002/pen.22161en_AU
dc.identifier.issn1548-2634en_AU
dc.identifier.issue4en_AU
dc.identifier.journaltitlePolymer Engineering & Scienceen_AU
dc.identifier.pagination920-926en_AU
dc.identifier.urihttps://apo.ansto.gov.au/handle/10238/15394en_AU
dc.identifier.volume52en_AU
dc.language.isoenen_AU
dc.publisherWileyen_AU
dc.relation.urihttps://doi.org/10.1002/pen.22161en_AU
dc.subjectPorous materialsen_AU
dc.subjectThin Filmsen_AU
dc.subjectFabricationen_AU
dc.subjectHoneycomb structuresen_AU
dc.subjectEvaporationen_AU
dc.subjectScanning Electron microscopyen_AU
dc.subjectCalorimetryen_AU
dc.titleFabrication of honeycomb-structured porous films from poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) via the breath figures methoden_AU
dc.typeJournal Articleen_AU
Files
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Collections