Plasma polymer-functionalized silica particles for heavy metals remova
No Thumbnail Available
Date
2015-01-20
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
American Chemical Society
Abstract
Highly negatively charged particles were fabricated via an innovative plasma-assisted approach for the removal of heavy metal ions. Thiophene plasma polymerization was used to deposit sulfur-rich films onto silica particles followed by the introduction of oxidized sulfur functionalities, such as sulfonate and sulfonic acid, via water–plasma treatments. Surface chemistry analyses were conducted by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy. Electrokinetic measurements quantified the zeta potentials and isoelectric points (IEPs) of modified particles and indicated significant decreases of zeta potentials and IEPs upon plasma modification of particles. Plasma polymerized thiophene-coated particles treated with water plasma for 10 min exhibited an IEP of less than 3.5. The effectiveness of developed surfaces in the adsorption of heavy metal ions was demonstrated through copper (Cu) and zinc (Zn) removal experiments. The removal of metal ions was examined through changing initial pH of solution, removal time, and mass of particles. Increasing the water plasma treatment time to 20 min significantly increased the metal removal efficiency (MRE) of modified particles, whereas further increasing the plasma treatment time reduced the MRE due to the influence of an ablation mechanism. The developed particulate surfaces were capable of removing more than 96.7% of both Cu and Zn ions in 1 h. The combination of plasma polymerization and oxidative plasma treatment is an effective method for the fabrication of new adsorbents for the removal of heavy metals. © 2015 American Chemical Society
Description
Keywords
Adsorption, Plasma, Thiophene, Polymerization, Water treatment, Heavy metals
Citation
Akhavan, B., Jarvis, K., & Majewski, P. (2015). Plasma polymer-functionalized silica particles for heavy metals removal. ACS Applied Materials & Interfaces, 7(7), 4265-4274. doi:10.1021/am508637k