Incorporation of Yttria particles into 410L stainless steel by a power metallurgy route

Simple item page
dc.contributor.authorZeybek, Aen_AU
dc.contributor.authorPirfo Barroso, Sen_AU
dc.contributor.authorChong, KBen_AU
dc.contributor.authorEdwards, Len_AU
dc.contributor.authorFitzpatrick, MEen_AU
dc.date.accessioned2016-11-01T00:55:53Zen_AU
dc.date.available2016-11-01T00:55:53Zen_AU
dc.date.issued2014-04-11en_AU
dc.date.statistics2016-11-01en_AU
dc.description.abstractAddition of yttria to steels has been proposed for the fabrication of oxide-dispersion-strengthened materials for nuclear power applications. We have investigated materials prepared from 12 Cr martensitic stainless steel, AISI 410L, produced by powder metallurgy. Materials were produced with and without yttria addition, and two different sizes of yttria were used, 0.9 µm and 50 nm. Tensile and mini-creep tests were performed to determine mechanical properties. Optical microscopy, SEM, TEM, and EDX analysis were used to investigate the microstructures and deformation mechanisms and to obtain information about non-metallic inclusion particles. SiO2, MnS, and Y2Si2O7 inclusion particles were observed. An SiO2 and Y2O3 interaction was seen to have occurred during the ball milling, which impaired the final mechanical properties. Small-angle neutron scattering experiments showed that the matrix chemistry prevented effective dissolution of the yttria. © The Author(s) 2014en_AU
dc.identifier.citationZeybek, A., Pirfo Barroso, S., Chong, K. B., Edwards, L., & Fitzpatrick, M. E. (2014). Incorporation of Yttria particles into 410L stainless steel by a power metallurgy route. Journal of Materials Engineering and Performance, 23(6). doi:10.1007/s11665-014-0988-6en_AU
dc.identifier.govdoc7554en_AU
dc.identifier.issn1059-9495en_AU
dc.identifier.issue6en_AU
dc.identifier.journaltitleJournal of Materials Engineering and Performanceen_AU
dc.identifier.pagination2120-2130en_AU
dc.identifier.urihttps://doi.org/10.1007/s11665-014-0988-6en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/7998en_AU
dc.identifier.volume23en_AU
dc.language.isoenen_AU
dc.publisherSpringeren_AU
dc.subjectCreepen_AU
dc.subjectStressesen_AU
dc.subjectRupturesen_AU
dc.subjectMechanical propertiesen_AU
dc.subjectStainless steelsen_AU
dc.subjectOptical microscopyen_AU
dc.subjectPowder metallurgyen_AU
dc.titleIncorporation of Yttria particles into 410L stainless steel by a power metallurgy routeen_AU
dc.typeJournal Articleen_AU
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Zeybek2014_Article_IncorporationOfY2O3ParticlesIn.pdf
Size:
4.57 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Journal Articles