Optimization of synthesis of the solid solution, Pb(Zr1-xTix)O-3 on a single substrate using a high-throughput modified molecular-beam epitaxy technique.

Simple item page
dc.contributor.authorAnderson, PSen_AU
dc.contributor.authorGuerin, Sen_AU
dc.contributor.authorHayden, BEen_AU
dc.contributor.authorHan, Yen_AU
dc.contributor.authorPasha, Men_AU
dc.contributor.authorWhittle, KRen_AU
dc.contributor.authorReaney, IMen_AU
dc.date.accessioned2010-03-31T22:53:16Zen_AU
dc.date.accessioned2010-04-30T05:08:00Zen_AU
dc.date.available2010-03-31T22:53:16Zen_AU
dc.date.available2010-04-30T05:08:00Zen_AU
dc.date.issued2009-01en_AU
dc.date.statistics2009-01en_AU
dc.description.abstractSynthesis of Pb(Zr1–xTix)O3 (PZT) on a single substrate using a high-throughput molecular-beam epitaxy technique was demonstrated. In situ synthesis of crystalline PZT at elevated substrate temperatures could not be achieved, as reevaporation of Pb (PbO) occurred and the partial pressure of O2 was insufficient to prevent formation of a PbPtx phase during deposition. Instead, ex situ postdeposition annealing was performed on PZT deposited at room temperature. Dense single phase PZT was prepared with a compositional range of 0.1 > x > 0.9, for film thicknesses up to 800 nm. Transmission electron microscopy revealed the grain size increased from 50 nm to ~0.5 µm with increasing Zr-concentration and became more columnar. Raman, x-ray diffraction, and scanning electron microscopy/energy dispersive spectroscopy results revealed a morphotropic phase boundary between rhombohedral and tetragonal phases occurred at x ~0.4 rather than at x = 0.47 in bulk ceramics. This was attributed to clamping arising from mismatch in thermal expansion between the film and substrate. © 2009, Materials Research Societyen_AU
dc.identifier.citationAnderson, P. S., Guerin, S., Hayden, B. E., Han, Y., Pasha, M., Whittle, K. R., & Reaney, I. M. (2009). Optimization of synthesis of the solid solution, pb(zr1-xtix)o-3 on a single substrate using a high-throughput modified molecular-beam epitaxy technique. Journal of Materials Research, 24(1), 164-172. doi:10.1557/JMR.2009.0008en_AU
dc.identifier.govdoc1514en_AU
dc.identifier.issn0884-2914en_AU
dc.identifier.issue1en_AU
dc.identifier.journaltitleJournal of Materials Researchen_AU
dc.identifier.pagination164-172en_AU
dc.identifier.urihttp://dx.doi.org/10.1557/JMR.2009.0008en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/3009en_AU
dc.identifier.volume24en_AU
dc.language.isoenen_AU
dc.publisherMaterials Research Societyen_AU
dc.subjectSolid solutionsen_AU
dc.subjectMolecular beamsen_AU
dc.subjectEpitaxyen_AU
dc.subjectTransmission electron microscopyen_AU
dc.subjectPZTen_AU
dc.subjectSubstratesen_AU
dc.titleOptimization of synthesis of the solid solution, Pb(Zr1-xTix)O-3 on a single substrate using a high-throughput modified molecular-beam epitaxy technique.en_AU
dc.typeJournal Articleen_AU
Files
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description:
Download
Collections
Journal Articles