Residual stress measurement of a 316l stainless steel bead-on-plate specimen utilising the contour method

Simple item page
dc.contributor.authorTurski, Men_AU
dc.contributor.authorEdwards, Len_AU
dc.date.accessioned2010-04-08T07:00:37Zen_AU
dc.date.accessioned2010-04-30T05:09:26Zen_AU
dc.date.available2010-04-08T07:00:37Zen_AU
dc.date.available2010-04-30T05:09:26Zen_AU
dc.date.issued2009-01en_AU
dc.date.statistics2009-01en_AU
dc.description.abstractThis paper describes the mapping of transverse residual stresses within a single bead-on-plate round robin test specimen. The purpose of these measurements was to quantify the magnitude and shape of the residual stress field arising from a single weld bead laid down on an austenitic stainless steel plate. Measurements were made through the thickness of the specimen using the contour method. The contour method is a new destructive, stress relaxation method allowing the full field residual stress to be measured. Results from these measurements show transverse tensile residual stresses over 150 MPa below the plate surface along the length of the weld bead with peak stresses of up to 210 MPa close to the weld stop position. Finally, as these measurements are insensitive to local microstructure variations within the specimen (i.e. texture or variations in lattice parameter), they are useful in helping to validate diffraction based residual stress measurements made within this round robin measurement program. © 2009, Elsevier Ltd.en_AU
dc.identifier.citationTurski, M., & Edwards, L. (2009). Residual stress measurement of a 316l stainless steel bead-on-plate specimen utilising the contour method. International Journal of Pressure Vessels and Piping, 86(1), 126-131. doi:10.1016/j.ijpvp.2008.11.020en_AU
dc.identifier.govdoc1608en_AU
dc.identifier.issn0308-0161en_AU
dc.identifier.issue1en_AU
dc.identifier.journaltitleInternational Journal of Pressure Vessels and Pipingen_AU
dc.identifier.pagination126-131en_AU
dc.identifier.urihttp://dx.doi.org/10.1016/j.ijpvp.2008.11.020en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/3120en_AU
dc.identifier.volume86en_AU
dc.language.isoenen_AU
dc.publisherElsevieren_AU
dc.subjectStainless steelsen_AU
dc.subjectResidual stressesen_AU
dc.subjectWelded jointsen_AU
dc.subjectStress relaxationen_AU
dc.subjectDiffractionen_AU
dc.subjectMicrostructureen_AU
dc.titleResidual stress measurement of a 316l stainless steel bead-on-plate specimen utilising the contour methoden_AU
dc.typeJournal Articleen_AU
Files
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.79 KB
Format:
Plain Text
Description:
Download
Collections
Journal Articles