Structural changes in a commercial lithium-ion battery during electrochemical cycling: an in situ neutron diffraction study
No Thumbnail Available
Date
2010-12-15
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Abstract
The structural response to electrochemical cycling of the components within a commercial Li-ion battery (LiCoO2 cathode, graphite anode) is shown through in situ neutron diffraction. Lithuim insertion and extraction is observed in both the cathode and anode. In particular, reversible Li incorporation into both layered and spinel-type LiCoO2 phases that comprise the cathode is shown and each of these components features several phase transitions attributed to Li content and correlated with the state-of-charge of the battery. At the anode, a constant cell voltage correlates with a stable lithiated graphite phase. Transformation to de-lithiated graphite at the discharged state is characterised by a sharp decrease in both structural cell parameters and cell voltage. In the charged state, a two-phase region exists and is composed of the lithiated graphite phase and about 64% LiC6. It is postulated that trapping Li in the solid|electrolyte interface layer results in minimal structural changes to the lithiated graphite anode across the constant cell voltage regions of the electrochemical cycle. © 2010, Elsevier Ltd.
Description
Keywords
Lithium, Neutron diffraction, Radioisotope batteries, Graphite, Electrochemistry, Cathodes
Citation
Sharma, N., Peterson, V. K., Elcombe, M. M., Avdeev, M., Studer, A. J., Blagojevic, N., Yosoff, R., & Kamarulzaman, N. (2010). Structural changes in a commercial lithium-ion battery during electrochemical cycling: an in situ neutron diffraction study. Journal of Power Sources, 195(24), 8258-8266. doi:10.1016/j.jpowsour.2010.06.114