TEM characterization of MnO2 cathode in an aqueous lithium secondary battery

Simple item page
dc.contributor.authorMinakshi, Men_AU
dc.contributor.authorMitchell, DRGen_AU
dc.contributor.authorSingh, Pen_AU
dc.contributor.authorThurgate, Sen_AU
dc.date.accessioned2022-08-25T03:47:45Zen_AU
dc.date.available2022-08-25T03:47:45Zen_AU
dc.date.issued2006-12-05en_AU
dc.date.statistics2021-08-31en_AU
dc.description.abstractThe discharge characteristics of manganese dioxide cathode in the presence of small amounts (1, 3 and 5 wt. %) of TiS2 additive has been investigated in an alkaline cell using aqueous lithium hydroxide as the electrolyte [1]. The incorporation of small amounts of TiS2 additives into MnO2 was found to improve the battery discharge capacity from 150 to 270 mAh/g. However, increasing the additive from 3 to 5 wt. % causes a decrease in the discharge capacity. Hence, the objective is to gain insight into the role of TiS2 in MnO2 and its lithiation mechanism. For this purpose, we have used transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). The valence state determination of the discharged MnO2 was performed using EELS. The Mn L2,3 edge contains two white lines (strong peaks) at about 640 eV (L3) and 650 eV (L2). The relative intensities of these Mn L2,3 peaks varies as a function of valence state in the Mn oxides i.e. MnO, Mn2O3 and MnO2 [2]. As-received MnO2 has a valence state of 4, as expected. However, Li intercalated materials showed evidence for reduction, the extent of which depended on the amount of TiS2 additive. The valance state of Li intercalated MnO2 with 3 wt. % TiS2 additive was 3.1 while that for the equivalent material with 5wt. % TiS2 additive was 3.5. Reduction of Mn occurs as a result of Li intercalation, the extent being more marked for the 3 wt. % TiS2 loading. This result is in accordance with the discharge behavior, since the capacity of the 3 wt. % material (270 mAh/g) was significantly larger than that for the equivalent 5 wt. % material (75 mAh/g)). TEM imaging showed a presence of nano particulate Mn oxides, of about 50 nm diameter, in the 5 wt. % TiS2 material. This could inhibit the lithium intercalation resulting in a valence state of 3.5 and thereby low discharge capacity whereas this nano particulate material is not present in 1 and 5 wt. % TiS2 loaded material.en_AU
dc.identifier.citationMinakshi, M., Mitchell, D., Singh, P., & Thurgate, S. (2006). TEM characterization of MnO2 cathode in an aqueous lithium secondary battery. Paper presented at the Australian Instute of Physics 17th National Congress 2006, Brisbane Convention and Exhibition Centre, Brisbane Australia, Sunday 3 - Friday 8 December 2006. Retrieved from: https://www.aip.org.au/resources/Documents/Congress/AIPCongress-2006-Program.pdfen_AU
dc.identifier.conferenceenddate8 December 2006en_AU
dc.identifier.conferencenameAustralian Instute of Physics 17th National Congress 2006en_AU
dc.identifier.conferenceplaceBrisbane, Australiaen_AU
dc.identifier.conferencestartdate3 December 2006en_AU
dc.identifier.urihttps://www.aip.org.au/resources/Documents/Congress/AIPCongress-2006-Program.pdfen_AU
dc.identifier.urihttps://apo.ansto.gov.au/dspace/handle/10238/13610en_AU
dc.language.isoenen_AU
dc.publisherAustralian Institute of Physicsen_AU
dc.subjectTransmission electron microscopyen_AU
dc.subjectOxidesen_AU
dc.subjectCathodesen_AU
dc.subjectLithiumen_AU
dc.subjectElectric batteriesen_AU
dc.subjectLithium ion batteriesen_AU
dc.subjectLithium hydroxidesen_AU
dc.subjectElectric dischargesen_AU
dc.titleTEM characterization of MnO2 cathode in an aqueous lithium secondary batteryen_AU
dc.typeConference Abstracten_AU
Files
Original bundle
Now showing 1 - 2 of 2
Thumbnail Image
Name:
AIPCongress-2006-Program(2).pdf
Size:
13.72 MB
Format:
Adobe Portable Document Format
Description:
Download
Thumbnail Image
Name:
TEM_characterization.pdf
Size:
576.57 KB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Conference Publications