Investigation of residual stresses distribution in high strength steel beams using neutron diffraction

Simple item page
dc.contributor.authorLe, Ten_AU
dc.contributor.authorParadowska, AMen_AU
dc.contributor.authorBradford, MAen_AU
dc.date.accessioned2023-11-22T21:48:19Zen_AU
dc.date.available2023-11-22T21:48:19Zen_AU
dc.date.issued2018-11-19en_AU
dc.date.statistics2023-07-07en_AU
dc.description.abstractResidual stresses induced in the fabrication of steel components may lead to distortion and a significant loss of strength in a steel structure. Accordingly, research on the residual stress distribution in steel sections is becoming an important consideration in steel structural analysis. The characteristics of residual stresses in hot-rolled and welded mild steel sections have been extensively reported and integrated in national design standards. However, it is questionable as to whether such patterns are applicable for high strength steel. Currently, very high strength low-alloy steels produced by quenching-tempering and thermo-controlled processes offer yield strengths as high as 1000 MPa with good weldability, and because of this they have been receiving much attention in mega-structure applications such as long-span bridges or high-rise buildings. To promote the use of such materials, knowledge of welding residual stresses is vital. This study presents the measurement of residual stresses in I-beam sections welded from Australian BISPLATE80 and BISPLATE100 high strength steel using neutron diffraction technique. Tensile coupon testing shows the base plate materials have corresponding yield stresses of 851 MPa and 1003 MPa respectively, with the weld material yield strength as high as 810 MPa. The residual stress measurement was taken on the KOWARI strain scanner at ANSTO. Due to the complexity and the large size of samples the SSCANSS software and a virtual instrument of KOWARI were utilised to position a sample and optimise the measurement procedure. Important features of the residual stress distribution in welded high strength steel I-sections have been obtained across the beam and within the weld. These results are the essential in order to validate a residual stress model able to be used in future high strength steel structural analysis, design and assessment. © The Authors.en_AU
dc.identifier.citationLe, T., Paradowska, A., & Bradford, MA. (2018). Investigation of Residual Stresses Distribution in High Strength Steel Beams Using Neutron Diffraction. Presentation to the ANBUG-AINSE Neutron Scattering Symposium, AANSS 2018, AINSE Conference Centre New Illawarra Road Lucas Heights NSW 2234, Australia, Monday 19 November 2018 - Wednesday 21 November 2018, (pp. 27). Retrieved from https://events01.synchrotron.org.au/event/84/book-of-abstracts.pdfen_AU
dc.identifier.conferenceenddate2018-11-21en_AU
dc.identifier.conferencenameANBUG-AINSE Neutron Scattering Symposium, AANSS 2018en_AU
dc.identifier.conferenceplaceLucas Heights, New South Walesen_AU
dc.identifier.conferencestartdate2018-11-19en_AU
dc.identifier.pagination27en_AU
dc.identifier.urihttps://apo.ansto.gov.au/handle/10238/15235en_AU
dc.language.isoenen_AU
dc.publisherAustralian Institute of Nuclear Science and Engineering (AINSE)en_AU
dc.relation.urihttps://events01.synchrotron.org.au/event/84/book-of-abstracts.pdfen_AU
dc.subjectResidual stressesen_AU
dc.subjectSteelsen_AU
dc.subjectANSTOen_AU
dc.subjectNeutronsen_AU
dc.subjectNeutron diffractionen_AU
dc.subjectYieldsen_AU
dc.titleInvestigation of residual stresses distribution in high strength steel beams using neutron diffractionen_AU
dc.typeConference Abstracten_AU
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
book-of-abstracts.pdf
Size:
731.95 KB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Conference Publications