Fabrication of high strength oxide ceramic composites

Simple item page
dc.contributor.authorRajendran, Sen_AU
dc.contributor.authorRossell, HJen_AU
dc.date.accessioned2025-09-01T06:54:39Zen_AU
dc.date.available2025-09-01T06:54:39Zen_AU
dc.date.issued1989-08en_AU
dc.date.statistics2025-08-01en_AU
dc.descriptionPhysical copy of journal held by ANSTO Library at DDC: 666/47. Conference name also called "2nd International Ceramic Conference and Exhibition" on preface.en_AU
dc.description.abstractYttria partially stabilised zirconia (Y-PSZ), alumina, mullite, Y-PSZ-AIZO3, alumina-zirconia and mullite-zirconia powders were prepared through the hydroxide precipitation technique. The experimental conditions during precipitation were manipulated to produce homogeneous and I reactive powders. The formation of chemically bonded strong agglomerates was suppressed by dispersing the powders in alcohol. The powders could be densified conventionally to near theoretical values without sintering aids. The sintering bodies had very uniform microstructures and good mechanical properties. The fracture strength of Y-PSZ, alumina, mullite and Y-PSZ-N203 after HIPing was over 1550, 625, 350, and 2000 MPa respectively. Zirconia dispersion significantly improved the strength of alumina and mullite.en_AU
dc.identifier.citationRajendran, S., & Rossell, H. J. (1989). Fabrication of high strength oxide ceramic composites. Presentation to the International Ceramic Conference (AUSTCERAM 90: ceramics technology - sharing the knowledge), Perth, Western Australia, 26-31 August 1990. In Journal of the Australian Ceramic Society, 25(2), 74.en_AU
dc.identifier.conferenceenddate1990-08-31en_AU
dc.identifier.conferencenameInternational Ceramic Conference (AUSTCERAM 90: ceramics technology - sharing the knowledge)en_AU
dc.identifier.conferenceplacePerth, Western Australiaen_AU
dc.identifier.conferencestartdate1990-08-26en_AU
dc.identifier.issn0004-881 Xen_AU
dc.identifier.issue2en_AU
dc.identifier.journaltitleJournal of the Australian Ceramic Societyen_AU
dc.identifier.pagination74en_AU
dc.identifier.urihttps://apo.ansto.gov.au/handle/10238/16427en_AU
dc.identifier.volume25en_AU
dc.language.isoenen_AU
dc.publisherTrans Tech Publicationsen_AU
dc.subjectFabricationen_AU
dc.subjectOxidesen_AU
dc.subjectCeramicsen_AU
dc.subjectZirconiumen_AU
dc.subjectPowdersen_AU
dc.subjectMechanical propertiesen_AU
dc.subjectFracture propertiesen_AU
dc.subjectMulliteen_AU
dc.titleFabrication of high strength oxide ceramic compositesen_AU
dc.typeConference Abstracten_AU
Files
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Conference Publications