Comparative study of Synroc-c ceramics produced by hot-pressing and inductive melting
No Thumbnail Available
Date
1997
Journal Title
Journal ISSN
Volume Title
Publisher
Materials Research Society
Abstract
Three Synroc-C samples, containing simulated high level waste were studied. One was produced by the conventional hot-pressing method at ANSTO, Australia, and the others were obtained using cold crucible technology at Radon, Russia. One of the melted samples was prepared using the Australian sol-gel precursor and the second one was obtained from an oxide-nitrate mixture. It was established that the specimens have closely similar mineral compositions, with major hollandite, perovskite, zirconolite, and rutile. Small amounts of hibonite were also found. Unlike the hot-pressed Synroc containing metallic alloy particles, melted Synrocs contain molybdates. An investigation of mineral compositions and elemental distribution in the samples was carried out. Features of hot-pressed and melted ceramics were compared. Unit cell parameters of the Synroc phases were determined and preliminary results on durability of the melted Synroc are presented. © Materials Research Society 1997
Description
Physical copy held by ANSTO at DDC: 621.4838/31.
Abstract also available online a https://doi.org/10.1557/PROC-465-371
Keywords
Synroc process, High-level radioactive wastes, ANSTO, Australia, Australian organizations, Sol-gel process, Hollandite, Perovskite, Zirconolite, Rutile
Citation
Sobolev, I. A., Stefanovsky, S. V., Omelianenko, B. I., Ioudintsev, S. V., Vance, E. R., & Jostsons, A. (1996). Comparative study of Synroc-c ceramics produced by hot-pressing and inductive melting. Paper presented to the Scientific Basis for Nuclear Waste Management XX, 2-6 December 1996, Boston, Massachachuetts, U. S. A. In Gray, W. J. & Triay, I. R. (Eds.), Material Research Society Symposium Proceedings, Symposium held 2-6 December, 1996, Boston, Massachusetts, U. S. A., (Vol. 465, pp. 371-378).