Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/9657
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChin, KS-
dc.contributor.authorIdapalapati, S-
dc.contributor.authorParadowska, AM-
dc.contributor.authorReid, M-
dc.contributor.authorShukla, S-
dc.contributor.authorArdi, DT-
dc.date.accessioned2020-06-15T00:43:23Z-
dc.date.available2020-06-15T00:43:23Z-
dc.date.issued2019-08-31-
dc.identifier.citationChin K.S., Idapalapati S., Paradowska A., Reid M., Shukla S., Ardi D.T. (2020) Mechanical stress relaxation of a laser peened and shot peened Ni-based superalloy. In: Itoh S., Shukla S. (eds) Advanced Surface Enhancement. International Conference on Advanced Surface Enhancement (INCASE2019), 10-13th September, Singapore. (pp. 182-189). doi:10.1007/978-981-15-0054-1_19en_AU
dc.identifier.govdoc9689-
dc.identifier.isbn9789811500541-
dc.identifier.isbn9789811500534-
dc.identifier.urihttps://doi.org/10.1007/978-981-15-0054-1_19en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/9657-
dc.description.abstractNickel based superalloy IN718 specimens were subjected to laser peening and shot peening. The residual stress and work hardening introduced by laser peening and shot peening were characterized using neutron diffraction method and electron backscattered diffraction (EBSD). A modified set up in reflective mode was utilized during neutron diffraction to optimize the spatial and temporal resolution to perform in-situ residual stress measurements at pre-determined cycle. Residual stress relaxation was only observed in the direction of loading while the residual stress in the transverse direction remained at a similar magnitude. Residual stress relaxation was observed to be most prominent in the first cycle of fatigue at R ratio = 0.1 with little stress relaxation in subsequent fatigue load cycles. Under tensile-tensile loading, stress relaxation occurs when the superposition of tensile residual stress and applied loading exceeds the localized yield strength of the material. Stress relaxation was found to be well correlated with the magnitude of work hardening. Residual stress relaxation as a function of depth and number of cycles were also recorded to illustrate the changes in residual stress during the cyclic loading. © 2020 Springer Nature Switzerland AG.en_AU
dc.language.isoenen_AU
dc.publisherSpringer Nature Switzerland AG.en_AU
dc.subjectStressesen_AU
dc.subjectHeat resisting alloysen_AU
dc.subjectShot peeningen_AU
dc.subjectLasersen_AU
dc.subjectHardeningen_AU
dc.subjectNeutron diffractionen_AU
dc.subjectBackscatteringen_AU
dc.subjectIn-situ processingen_AU
dc.subjectFatigueen_AU
dc.subjectMechanical propertiesen_AU
dc.subjectTensile propertiesen_AU
dc.subjectLoadingen_AU
dc.titleMechanical stress relaxation of a laser peened and shot peened Ni-based superalloyen_AU
dc.typeConference Paperen_AU
dc.date.statistics2020-06-01-
Appears in Collections:Book Chapters

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.