Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/7979
Title: Hardness-tensile property relationships for HAZ in 6061-T651 aluminum
Authors: Stathers, PA
Hellier, AK
Harrison, RP
Norrish, J
Keywords: Aluminium
Tensile properties
Metals
Wwlding
Vickers hardness
Heat affected zone
Issue Date: Aug-2014
Publisher: American Welding Society
Citation: Stathers, P. A., Hellier, A. K., Harrison, R. P., Ripley, M. I., & Norrish, J. (2014). Hardness-tensile property relationships for HAZ in 6061-T651 aluminum. Welding Journal, 93(8), 301S-311S
Abstract: High-strength aluminum is used extensively in industry, with welding being a widely used fabrication method. This work focuses on welding of 6061-T651 aluminum and establishment of the hardness–tensile properties relationship in the heat-affected zone (HAZ) of a gas metal arc weld using 4043 filler material. Test welds were prepared from 12.7-mm-thick plate with a single-V weld preparation. Base plate temperatures were measured with an array of eight embedded thermocouples during welding, relating temperature to properties at intervals from the weld. Through-thickness slices 1.7 mm thick were removed, by electric discharge machining, from the plate parallel to the weld at 2-mm intervals and extending from the weld centerline to 40 mm. into the HAZ and base plate. Tensile samples were prepared from these slices, and tensile properties and hardness values measured to establish a relationship between these two parameters. Both EQUOTIP (portable hardness tester) and Vickers microhardness measurements were conducted and related to tensile properties. Although a significant body of work exists relating tensile properties to hardness, no previous study was found that used this approach. Most work appeared to use cross-weld tensile tests, which only give the point of lowest strength. Sections of base plate material having a different thickness (31.75 mm) from that of the welded samples, and from a different source, were thermally aged to four hardness values and the hardness–tensile relationship was also established for this material. These results were compared with those of the HAZ samples; the results were found to fall within the scatter band of HAZ results.
Gov't Doc #: 7541
URI: https://www.aws.org/publications/WeldingJournal
http://apo.ansto.gov.au/dspace/handle/10238/7979
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
WJ_2014_08_s301.pdf6.8 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.