Browsing by Author "Kalantar-Zadeh, K"

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Fabrication, structural characterization and testing of a nanostructured tin oxide gas sensor
    (Institute of Electrical and Electronics Engineers (IEEE), 2009-04-07) Partridge, JG; Field, MR; Sadek, AZ; Kalantar-Zadeh, K; Du Plessis, J; Taylor, MB; Atanacio, AJ; Prince, KE; McCulloch, DG
    A nanostructured SnO 2 conductometric gas sensor was produced from thermally evaporated Sn clusters using a thermal oxidation process. SnO 2 clusters were simultaneously formed in an identical process on a Si 3 N 4 membrane featuring an aperture created by a focused ion beam (FIB). Clusters attached to the vertical edges of the aperture were imaged using a transmission electron microscope. The original morphology of the Sn cluster film was largely preserved after the thermal oxidation process and the thermally oxidized clusters were found to be polycrystalline and rutile in structure. NO 2 gas sensing measurements were performed with the sensor operating at various temperatures between 25degC and 290degC. At an operating temperature of 210degC, the sensor demonstrated a normalized change in resistance of 3.1 upon exposure to 510 ppb of NO 2 gas. The minimum response and recovery times for this exposure were 45 s and 30 s at an operating temperature of 265degC. The performance of the SnO 2 sensor compared favorably with previously published results. Finally, secondary ion mass spectrometry and X-ray photoelectron spectroscopy were used to establish the levels of nitrogen present in the films following exposure to NO 2 gas. © Copyright 2009 IEEE
  • Thumbnail Image
    Item
    Liquid-metal-assisted deposition and patterning of molybdenum dioxide at low temperature
    (American Chemical Society, 2021-11-10) Wang, Y; Mayyas, M; Yang, J; Ghasemian, MB; Tang, J; Mousavi, M; Han, J; Ahmed, M; Baharfar, M; Mao, G; Yao, Y; Esrafilzadeh, D; Cortie, DL; Kalantar-Zadeh, K
    Molybdenum dioxide (MoO2), considering its nearmetallic conductivity and surface plasmonic properties, is a great material for electronics, energy storage devices and biosensing. Yet to this day, room-temperature synthesis of large area MoO2, which allows deposition on arbitrary substrates, has remained a challenge. Due to their reactive interfaces and specific solubility conditions, gallium-based liquid metal alloys offer unique opportunities for synthesizing materials that can meet these challenges. Herein, a substrate-independent liquid metal-based method for the room temperature deposition and patterning of MoO2 is presented. By introducing a molybdate precursor to the surrounding of a eutectic gallium-indium alloy droplet, a uniform layer of hydrated molybdenum oxide (H2MoO3) is formed at the interface. This layer is then exfoliated and transferred onto a desired substrate. Utilizing the transferred H2MoO3 layer, a laser-writing technique is developed which selectively transforms this H2MoO3 into crystalline MoO2 and produces electrically conductive MoO2 patterns at room temperature. The electrical conductivity and plasmonic properties of the MoO2 are analyzed and demonstrated. The presented metal oxide room-temperature deposition and patterning method can find many applications in optoelectronics, sensing, and energy industries. © 2021 American Chemical Society