Browsing by Author "Afshar, N"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    High-speed free-run ptychography at the Australian Synchrotron
    (International Union of Crystallography, 2022-03) Jones, MWM; van Riessen, GA; Phillips, NW; Schrank, CE; Hinsley, GN; Afshar, N; Reinhardt, J; de Jonge, MD; Kewish, CM
    Over the last decade ptychography has progressed rapidly from a specialist ultramicroscopy technique into a mature method accessible to non-expert users. However, to improve scientific value ptychography data must reconstruct reliably, with high image quality and at no cost to other correlative methods. Presented here is the implementation of high-speed ptychography used at the Australian Synchrotron on the XFM beamline, which includes a free-run data collection mode where dead time is eliminated and the scan time is optimized. It is shown that free-run data collection is viable for fast and high-quality ptychography by demonstrating extremely high data rate acquisition covering areas up to 352 000 μm2 at up to 140 μm2 s-1, with 13x spatial resolution enhancement compared with the beam size. With these improvements, ptychography at velocities up to 250 μm s-1 is approaching speeds compatible with fast-scanning X-ray fluorescence microscopy. The combination of these methods provides morphological context for elemental and chemical information, enabling unique scientific outcomes. © The Authors - Open Access CC-By Licence
  • Thumbnail Image
    Item
    Micro-computed tomography beamline of the Australian synchrotron: micron-size spatial resolution X-ray imaging
    (MDPI, 2023-01-18) Arhatari, BD; Stevenson, AW; Thompson, D; Walsh, A; Fiala, T; Ruben, G; Afshar, N; Ozbilgen, S; Feng, TT; Mudie, ST; Tissa, P
    The first new beamline of the BRIGHT project—involving the construction of eight new beamlines at the Australian Synchrotron—is the Micro-Computed Tomography (MCT) beamline. MCT will extend the facility’s capability for higher spatial resolution X-ray-computed tomographic imaging allowing for commensurately smaller samples in comparison with the existing Imaging and Medical Beamline (IMBL). The source is a bending-magnet and it is operating in the X-ray energy range from 8 to 40 keV. The beamline provides important new capability for a range of biological and material-science applications. Several imaging modes will be offered such as various X-ray phase-contrast modalities (propagation-based, grating-based, and speckle-based), in addition to conventional absorption contrast. The unique properties of synchrotron radiation sources (high coherence, energy tunability, and high brightness) are predominantly well-suited for producing phase contrast data. An update on the progress of the MCT project in delivering high-spatial-resolution imaging (in the order of micron size) of mm-scale objects will be presented in detail with some imaging results from the hot-commissioning stage. © 2023 The Authors.
  • Thumbnail Image
    Item
    Tandem probe analysis mode for synchrotron XFM: doubling throughput capacity
    (American Chemical Society (ACS), 2022-03-22) Doolette, CL; Howard, DL; Afshar, N; Kewish, CM; Paterson, DJ; Huang, J; Wagner, S; Santner, J; Wenzel, WW; Raimondo, T; De Vries Van Leeuwen, AT; Hou, L; van der Bom, F; Weng, H; Kopittke, PM; Lombi, E
    Synchrotron-based X-ray fluorescence microscopy (XFM) analysis is a powerful technique that can be used to visualize elemental distributions across a broad range of sample types. Compared to conventional mapping techniques such as laser ablation inductively coupled plasma mass spectrometry or benchtop XFM, synchrotron-based XFM provides faster and more sensitive analyses. However, access to synchrotron XFM beamlines is highly competitive, and as a result, these beamlines are often oversubscribed. Therefore, XFM experiments that require many large samples to be scanned can penalize beamline throughput. Our study was largely driven by the need to scan large gels (170 cm2) using XFM without decreasing beamline throughput. We describe a novel approach for acquiring two sets of XFM data using two fluorescence detectors in tandem; essentially performing two separate experiments simultaneously. We measured the effects of tandem scanning on beam quality by analyzing a range of contrasting samples downstream while simultaneously scanning different gel materials upstream. The upstream gels were thin (<200 μm) diffusive gradients in thin-film (DGT) binding gels. DGTs are passive samplers that are deployed in water, soil, and sediment to measure the concentration and distribution of potentially bioavailable nutrients and contaminants. When deployed on soil, DGTs are typically small (2.5 cm2), so we developed large DGTs (170 cm2), which can be used to provide extensive maps to visualize the diffusion of fertilizers in soil. Of the DGT gel materials tested (bis-acrylamide, polyacrylamide, and polyurethane), polyurethane gels were most suitable for XFM analysis, having favorable handling, drying, and analytical properties. This gel type enabled quantitative (>99%) transmittance with minimal (<3%) flux variation during raster scanning, whereas the other gels had a substantial effect on the beam focus. For the first time, we have (1) used XFM for mapping analytes in large DGTs and (2) developed a tandem probe analysis mode for synchrotron-based XFM, effectively doubling throughput. The novel tandem probe analysis mode described here is of broad applicability across many XFM beamlines as it could be used for future experiments where any uniform, highly transmissive sample could be analyzed upstream in the "background"of downstream samples. © 2022 The Authors. Published by American Chemical Society.