Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZeybek, A-
dc.contributor.authorPirfo Barroso, S-
dc.contributor.authorChong, KB-
dc.contributor.authorEdwards, L-
dc.contributor.authorFitzpatrick, ME-
dc.identifier.citationZeybek, A., Pirfo Barroso, S., Chong, K. B., Edwards, L., & Fitzpatrick, M. E. (2014). Incorporation of Yttria particles into 410L stainless steel by a power metallurgy route. Journal of Materials Engineering and Performance, 23(6). doi:10.1007/s11665-014-0988-6en_AU
dc.description.abstractAddition of yttria to steels has been proposed for the fabrication of oxide-dispersion-strengthened materials for nuclear power applications. We have investigated materials prepared from 12 Cr martensitic stainless steel, AISI 410L, produced by powder metallurgy. Materials were produced with and without yttria addition, and two different sizes of yttria were used, 0.9 µm and 50 nm. Tensile and mini-creep tests were performed to determine mechanical properties. Optical microscopy, SEM, TEM, and EDX analysis were used to investigate the microstructures and deformation mechanisms and to obtain information about non-metallic inclusion particles. SiO2, MnS, and Y2Si2O7 inclusion particles were observed. An SiO2 and Y2O3 interaction was seen to have occurred during the ball milling, which impaired the final mechanical properties. Small-angle neutron scattering experiments showed that the matrix chemistry prevented effective dissolution of the yttria. © The Author(s) 2014en_AU
dc.subjectMechanical propertiesen_AU
dc.subjectStainless steelsen_AU
dc.subjectOptical microscopyen_AU
dc.subjectPowder metallurgyen_AU
dc.titleIncorporation of Yttria particles into 410L stainless steel by a power metallurgy routeen_AU
dc.typeJournal Articleen_AU
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
Zeybek2014_Article_IncorporationOfY2O3ParticlesIn.pdf4.68 MBAdobe PDFThumbnail

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.