Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/7804
Title: Local structural changes in LiMn1.5Ni0.5O4 spinel cathode material for lithium-ion batteries
Authors: Rana, J
Glatthaar, S
Gesswein, H
Sharma, N
Binder, JR
Chernikov, R
Schumacher, G
Banhart, J
Keywords: Cathodes
Spectroscopy
X-ray detection
Lithium
Tetragonal lattices
Ions
Issue Date: 1-Jun-2014
Publisher: Elsevier
Citation: Rana, J., Glatthaar, S., Gesswein, H., Sharma, N., Binder, J. R., Chernikov, R., Schumarcher, G., & Banhart, J. (2014). Local structural changes in LiMn1.5Ni0.5O4 spinel cathode material for lithium-ion batteries. Journal of Power Sources, 255(0), 439-449. doi:10.1016/j.jpowsour.2014.01.037
Abstract: Local structural changes in LiMn1.5Ni0.5O4 cathode material were investigated by X-ray absorption spectroscopy in-operando using a specially designed electrochemical cell. The average structure of the starting material determined by neutron powder diffraction confirmed partial ordering of Mn and Ni cations on the octahedral sites in the spinel structure. It is observed that the electrochemical activity of the material between 3.5 V and 5.0 V is largely attributed to a two-step Ni2+/Ni4+ redox reaction. However, a small fraction of Mn3+ present in the pristine material also participates in electrochemical processes via a Mn3+/Mn4+ redox reaction. The excess lithium inserted into the material during deep discharge of the cell down to 2.0 V causes a further reduction of Mn4+ to Mn3+, while Ni remains electrochemically inactive. An increased proportion of Mn3+ in the material increases the distortion of MnO6 octahedra by the Jahn-Teller effect, which locally reduces the crystal symmetry from cubic to tetragonal, giving rise to the formation of domains of a Li2Mn2O4-type tetragonal phase. The fraction of this tetragonal phase was found to be directly related to the excess lithium inserted into the material. Upon subsequent charging to 2.9 V, the tetragonal phase tends to revert back to the original cubic spinel phase. The observed decline in the electrochemical performance of the material when cycled between 2.0 V and 5.0 V may be attributed to repetitive structural changes associated with the cubic ↔ tetragonal phase transition. © 2014, Elsevier B.V.
Gov't Doc #: 7368
URI: http://dx.doi.org/10.1016/j.jpowsour.2014.01.037
http://apo.ansto.gov.au/dspace/handle/10238/7804
ISSN: 0378-7753
Appears in Collections:Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.