Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/7658
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMohiuddin, K-
dc.contributor.authorStrezov, V-
dc.contributor.authorNelson, PF-
dc.contributor.authorStelcer, E-
dc.date.accessioned2016-10-06T00:40:04Z-
dc.date.available2016-10-06T00:40:04Z-
dc.date.issued2014-02-01-
dc.identifier.citationMohiuddin, K., Strezov, V., Nelson, P. F., & Stelcer, E. (2014). Characterisation of trace metals in atmospheric particles in the vicinity of iron and steelmaking industries in Australia. Atmospheric Environment, 83, 72-79. doi:10.1016/j.atmosenv.2013.11.011en_AU
dc.identifier.govdoc7226-
dc.identifier.issn1352-2310-
dc.identifier.urihttp://dx.doi.org/10.1016/j.atmosenv.2013.11.011en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/7658-
dc.description.abstractThe aims of this work are to provide a detailed physicochemical assessment of atmospheric particles collected in the vicinity of three iron and steelmaking plants and to indicate the importance of chemical characterisation of the particles, in addition to the assessment of the particle size and concentrations. In this study, atmospheric sampling sites were selected downstream of three iron and steel processing operations in Australia and one background site in an urban area with little industrial activity. The collected particles were analysed for a range of particle size mass concentrations and detailed chemical analysis of the trace metals Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn in the corresponding particle size ranges was carried out. The PM2.5 fractions in the PM10 particles at all sampling sites ranged from 35 to 62% indicating fine particles made a significant contribution to this size fraction at these sampling sites. Similarly, PM1 to the total PM10 at all sites varied from 20 to 46% and contributed significantly to the PM10 mass loading. When compared to the background sampling site, all detected metals in the particles collected near the iron and steelmaking operations had 3.4–14 times higher concentrations of PM10, PM2.5 and PM1. Iron (Fe) was found to be the dominant metal in the particles collected in vicinity of the iron and steel processing industries contributing up to 12% of the total particle mass loading. This study suggests that the metal composition of PM10, PM2.5 and PM1 varies significantly between sites and the associated metal exposure value is considerably higher in the vicinity of iron and steel processing industries than in the urban area for the same particle concentration level. © 2013, Elsevier Ltd.en_AU
dc.language.isoenen_AU
dc.publisherElsevieren_AU
dc.subjectIronen_AU
dc.subjectSteelsen_AU
dc.subjectAtmosphericsen_AU
dc.subjectMetalsen_AU
dc.subjectAustraliaen_AU
dc.subjectUrban areasen_AU
dc.titleCharacterisation of trace metals in atmospheric particles in the vicinity of iron and steelmaking industries in Australiaen_AU
dc.typeJournal Articleen_AU
dc.date.statistics2016-10-06-
Appears in Collections:Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.