Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/6537
Full metadata record
DC FieldValueLanguage
dc.contributor.authorCrawford, J-
dc.contributor.authorChambers, SD-
dc.contributor.authorCohen, DD-
dc.contributor.authorWilliams, AG-
dc.contributor.authorGriffiths, AD-
dc.contributor.authorStelcer, E-
dc.date.accessioned2016-01-27T03:58:55Z-
dc.date.available2016-01-27T03:58:55Z-
dc.date.issued2015-12-13-
dc.identifier.citationCrawford, J., Chamber, S., Cohen, D., Williams, A., Griffiths, A., & Stelcer. E. (2016). Assessing the impact of atmospheric stability on locally and remotely sourced aerosols at Richmond, Australia, using Radon-222. Atmospheric Environment 127: 107-117. doi:10.1016/j.atmosenv.2015.12.034en_AU
dc.identifier.govdoc6403-
dc.identifier.issn1352-2310-
dc.identifier.urihttp://dx.doi.org/10.1016/j.atmosenv.2015.12.034en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/6537-
dc.description.abstractA flexible radon-based scheme for the classification of nocturnal stability regimes was used for the interpretation of daily-integrated PM2.5 aerosol observations collected at Richmond, Australia, between 2007 and 2011. Source fingerprint concentrations for the dominant locally and remotely sourced aerosols were analysed by nocturnal radon stability category to characterise the influences of day-to-day changes in daily integrated atmospheric mixing. The fingerprints analysed included: smoke, vehicle exhaust, secondary sulfate and aged industrial sulfur. The largest and most consistent stability influences were observed on the locally sourced pollutants. Based on a 5-year composite, daily integrated concentrations of smoke were almost a factor of 7 higher when nocturnal conditions were classed as “stable” than when they were “near neutral”. For vehicle emissions a factor of 4 was seen. However, when the winter months were considered in isolation, it was found that these factors increased to 11.5 (smoke) and 5.5 (vehicle emissions) for daily average concentrations. The changes in concentration of the remotely sourced pollutants with atmospheric stability were comparatively small and less consistent, probably as a result of the nocturnal inversion frequently isolating near-surface observations from non-local sources at night. A similar classification was performed using the commonly-adopted Pasquill–Gifford (PG) stability typing technique based on meteorological parameters. While concentrations of fingerprints associated with locally-sourced pollutants were also shown to be positively correlated with atmospheric stability using the PG classification, this technique was found to underestimate peak pollutant concentrations under stable atmospheric conditions by almost a factor of 2. © 2015, Elsevier Ltd.en_AU
dc.language.isoenen_AU
dc.publisherElsevieren_AU
dc.subjectAtmosphericsen_AU
dc.subjectAerosolsen_AU
dc.subjectAustraliaen_AU
dc.subjectRadon 222en_AU
dc.subjectPollutantsen_AU
dc.subjectSulfatesen_AU
dc.titleAssessing the impact of atmospheric stability on locally and remotely sourced aerosols at Richmond, Australia, using Radon-222en_AU
dc.typeJournal Articleen_AU
Appears in Collections:Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.