Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/627
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDale, LSen_AU
dc.contributor.authorMatulis, CEen_AU
dc.date.accessioned2007-11-22T04:26:44Zen_AU
dc.date.accessioned2010-04-30T04:37:47Z-
dc.date.available2007-11-22T04:26:44Zen_AU
dc.date.available2010-04-30T04:37:47Z-
dc.date.issued1977-05en_AU
dc.identifierAAEC-E-412-
dc.identifier.citationDale, L. S., Matulis, C. E. (1977). The use of a total intensity internal standard for the emission spectrographic analysis of multicomponent alloy systems (AAEC/E412). Lucas Heights, NSW: Australian Atomic Energy Commission, Research Establishment.-
dc.identifier.govdoc637-
dc.identifier.isbn0642997845en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/627en_AU
dc.description.abstractA summation of the normalised relative intensities of selected spectrum lines of the major components of an alloy is used as an internal standard for the emission spectrographic analysis of a group of alloys. The procedure depends on the sum of the concentrations of the major components being constant but does not rely on prior knowledge of these concentrations. The usefulness of the technique is demonstrated in the analysis of stainless steels, using argon spark excitation with point-to-plane geometry. In principle, the technique should be applicable to other alloy systems.en_AU
dc.language.isoen_auen_AU
dc.publisherAustralian Atomic Energy Commissionen_AU
dc.subjectAlloys-
dc.subjectEmission spectra-
dc.subjectStainless steels-
dc.subjectIron compounds-
dc.titleUse of a total intensity internal standard for the emission spectrographic analysis of multicomponent alloy systemsen_AU
Appears in Collections:Scientific and Technical Reports

Files in This Item:
File Description SizeFormat 
AAEC-E-412.pdf387.55 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.