Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/419
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHanna, GLen_AU
dc.date.accessioned2007-11-22T04:22:02Zen_AU
dc.date.accessioned2010-04-30T04:34:28Z-
dc.date.available2007-11-22T04:22:02Zen_AU
dc.date.available2010-04-30T04:34:28Z-
dc.date.issued1972-07en_AU
dc.identifier.citationHanna, G. L. (1972). Fission gas retention in spherical beryllium oxide based fuel elements for the conceptual aborigine reactor. (AAEC/E230). Lucas Heights, NSW: Australian Atomic Energy Commission.-
dc.identifier.govdoc457-
dc.identifier.isbn0642994749en_AU
dc.identifier.otherAAEC-E-230en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/419en_AU
dc.description.abstractFission gas release from spherical BeO-based fuel elements designed for the conceptual ABORIGINE reactor and from 200 micron diameter fuel particles of U02-Th02 solid solution has been measured by in-pile sweep capsule testing In the temperature range 600ºC to 1000ºC, Release parameters (R/B ratios) of 10-7 to 10 s were measured on several fuelled spheres, and 10-4 to 10-2 on bare fuel particles. Two spheres with bonded cladding maintained good gas retention at 1000ºC for fast neutron doses (6 x 1020 nvt) which were three times that required of the ABORIGINE fuel element; however, the fission burnup (1.1 percent U + Th) was a factor of nine below the design burnup. It has thus been shown that BeO coatings on fuelled BeO spheres can in principle retain fission gases to the high standard required for ABORIGINE. Further work would be needed, (a) to assess the reliability of the fabrication process, (b) to test to high burnups fuelled spheres designed so that the coating is subjected only to fast neutron damage and which therefore should not crack from burnup effects, (c) to eliminate other possible cracking mechanisms such as thermal stress, and (d) to measure the release from cracked spheres under a range of conditions and thus to determine the allowable cracking rate more accurately.en_AU
dc.language.isoen_auen_AU
dc.publisherAustralian Atomic Energy Commissionen_AU
dc.subjectFuel elements-
dc.subjectBeryllium moderated reactors-
dc.subjectSpheres-
dc.subjectFission products-
dc.subjectGas flow-
dc.subjectRetention-
dc.titleFission gas retention in spherical beryllium oxide based fuel elements for the conceptual aborigine reactor.en_AU
Appears in Collections:Scientific and Technical Reports

Files in This Item:
File Description SizeFormat 
AAEC-E-230.pdf1.25 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.