Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChute, JHen_AU
dc.identifier.citationChute, J. H. (1963). Electron microscope studies of irradiated beryllium metal. (AAEC/E108). Lucas Heights, NSW: Australian Atomic Energy Commission.-
dc.description.abstractWhen beryllium is irradiated by fast neutrons, helium is produced by the (n,2n) and (n,α) transmutation reactions. Electron microscopy techniques have been used to study the nucleation and distribution of helium bubbles in several different grades of beryllium, after irradiation at temperatures in the range 75 — 700ºC. The effect of post-irradiation annealing is also reported. It is shown that for similar neutron doses and irradiation temperatures, there were wide variations in helium bubble size and distribution in specimens of beryllium fabricated by different methods. The most satisfactory material was that fabricated from Pechiney powder by direct hot extrusion followed by annealing for one hour at 800ºC and air cooling, it is suggested that the helium bubbles nucleate on second phase precipitates and that the distribution of this phase is strongly affected by fabrication and heat treatment.en_AU
dc.publisherAustralian Atomic Energy Commissionen_AU
dc.subjectElectron microscopes-
dc.subjectFast neutrons-
dc.titleElectron microscope studies of irradiated beryllium metal.en_AU
Appears in Collections:Scientific and Technical Reports

Files in This Item:
File Description SizeFormat 
AAEC-E-108.pdf2.6 MBAdobe PDFThumbnail

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.