Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/1763
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhu, H-
dc.contributor.authorZhang, XQ-
dc.contributor.authorCouper, MJ-
dc.contributor.authorDahle, AK-
dc.date.accessioned2010-07-05T06:23:09Z-
dc.date.available2010-07-05T06:23:09Z-
dc.date.issued2010-05-
dc.identifier.citationZhu, H. L., Zhang, X. Q., Couper, M. J., & Dahle, A. K. (2010). Formation of streak defects on anodized aluminum extrusions. JOM, 62(5), 46-51. doi:10.1007/s11837-010-0077-8en_AU
dc.identifier.govdoc1863-
dc.identifier.issn1047-4838-
dc.identifier.urihttp://dx.doi.org/10.1007/s11837-010-0077-8en_AU
dc.identifier.urihttp://apo.ansto.gov.au/dspace/handle/10238/1763-
dc.description.abstractStreaking is a common surface defect on anodized extrusions of 6xxx series soft alloys. Very often, the defects only become apparent after anodizing, which makes it difficult to identify their root cause. In industry practice, a trial-and-error method has been taken to reduce the intensities of the streak defects, greatly increasing the fabrication cost. This paper describes the formation mechanism of various streak defects on the basis of a literature review and experimental results. This provides a basis for developing effective measures for preventing the formation of these defects for the extrusion industry. © 2010, Springer. The original publication is available at www.springerlink.comen_AU
dc.language.isoenen_AU
dc.publisherSpringeren_AU
dc.subjectAluminiumen_AU
dc.subjectExtrusionen_AU
dc.subjectDefectsen_AU
dc.subjectAnodizationen_AU
dc.subjectAlloysen_AU
dc.subjectSurfacesen_AU
dc.titleFormation of streak defects on anodized aluminum extrusions.en_AU
dc.typeJournal Articleen_AU
dc.date.statistics2010-05-
Appears in Collections:Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.