Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNishiyama, Nen_AU
dc.contributor.authorWang, YDen_AU
dc.contributor.authorRivers, MLen_AU
dc.contributor.authorSutton, SRen_AU
dc.contributor.authorCookson, DJen_AU
dc.identifier.citationNishiyama, N., Wang, Y., Rivers, M. L., Sutton, S. R., & Cookson, D. (2007). Rheology of epsilon-iron up to 19 GPa and 600 K in the D-DIA. Geophysical Research Letters, 35(23), L23304. doi:10.1029/2007GL031431en_AU
dc.description.abstractStress-strain curves, i.e., relations between the differential stress and macroscopic sample strain, of polycrystalline ε-iron have been obtained at pressures of 17(±1) GPa, three different temperatures (600, 400, and 300 K), and various strain rates between 3.8 × 10−6 and 2.3 × 10−5 s−1 using the deformation-DIA coupled with monochromatic X-rays. Five independent stress-strain curves were obtained on axial shortening and the sample exhibited ductile behavior in all. Above 4% axial strain, sample stresses reach saturation and the sample exhibited steady-state deformation. Stress exponents at temperatures of 400 and 600 K were determined to be ∼31 and ∼7, respectively. These results indicate that ε-iron deforms in plasticity regime below 400 K and that the dominant deformation mechanism at 600 K may be low temperature power-law creep. The overall deformation behavior for ε-iron is consistent with that of zinc, suggesting that the deformation mechanism map of ε-iron resembles those of other hexagonal metals. © 2007, American Geophysical Unionen_AU
dc.publisherAmerican Geophysical Unionen_AU
dc.subjectEarth coreen_AU
dc.subjectCrystal structureen_AU
dc.titleRheology of ε-iron up to 19 GPa and 600 K in the D-DIAen_AU
dc.typeJournal Articleen_AU
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
2007GL031431.pdf301.41 kBAdobe PDFThumbnail

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.