Please use this identifier to cite or link to this item: https://apo.ansto.gov.au/dspace/handle/10238/10431
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLe, T-
dc.contributor.authorBradford, MA-
dc.contributor.authorParadowska, AM-
dc.date.accessioned2021-02-23T19:04:25Z-
dc.date.available2021-02-23T19:04:25Z-
dc.date.issued2018-11-
dc.identifier.citationLe, T., Bradford, M. A., & Paradowska, A. (2018). Investigation of residual stresses distribution in high strength steel beams using neutron diffraction. Paper presented at the AANSS 2018: Neutron Scattering Symposium; Sydney, NSW (Australia); 19-21 November 2018. In ANBUG-AINSE Neutron Scattering Symposium 2018 Abstracts, (p. 60). Australia.en_US
dc.identifier.urihttps://apo.ansto.gov.au/dspace/handle/10238/10431-
dc.description.abstractResidual stresses induced in the fabrication of steel components may lead to distortion and a significant loss of strength in a steel structure. Accordingly, research on the residual stress distribution in steel sections is becoming an important consideration in steel structural analysis. The characteristics of residual stresses in hot-rolled and welded mild steel sections have been extensively reported and integrated in national design standards. However, it is questionable as to whether such patterns are applicable for high strength steel. Currently, very high strength low-alloy steels produced by quenching-tempering and thermo-controlled processes offer yield strengths as high as 1000 MPa with good weldability, and because of this they have been receiving much attention in mega-structure applications such as long-span bridges or high-rise buildings. To promote the use of such materials, knowledge of welding residual stresses is vital. This study presents the measurement of residual stresses in I-beam sections welded from Australian BISPLATE80 and BISPLATE100 high strength steel using neutron diffraction technique. Tensile coupon testing shows the base plate materials have corresponding yield stresses of 851 MPa and 1003 MPa respectively, with the weld material yield strength as high as 810 MPa. The residual stress measurement was taken on the KOWARI strain scanner at ANSTO. Due to the complexity and the large size of samples the SSCANSS software and a virtual instrument of KOWARI were utilised to position a sample and optimise the measurement procedure. Important features of the residual stress distribution in welded high strength steel I-sections have been obtained across the beam and within the weld. These results are the essential in order to validate a residual stress model able to be used in future high strength steel structural analysis, design and assessment.en_US
dc.language.isoenen_US
dc.publisherAustralian Institute of Nuclear Science and Engineering (AINSE)en_US
dc.subjectANSTOen_US
dc.subjectCivil engineeringen_US
dc.subjectCrystal structureen_US
dc.subjectLow alloy steelsen_US
dc.subjectNeutron diffractionen_US
dc.subjectResidual stressesen_US
dc.subjectSteelsen_US
dc.subjectStructural beamsen_US
dc.subjectTestingen_US
dc.subjectWeldingen_US
dc.subjectYield strengthen_US
dc.titleInvestigation of residual stresses distribution in high strength steel beams using neutron diffractionen_US
dc.typeConference Paperen_US
dc.date.statistics2021-02-23-
Appears in Collections:Conference Publications

Files in This Item:
File Description SizeFormat 
contribution.pdf469.88 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.