Browsing by Author "Zhang, M"
Now showing 1 - 5 of 5
Results Per Page
Sort Options
- ItemNumerical investigation of residual stresses in chain-die formed AHSS u-channels(Materials Research Forum LLC, 2016-07-03) Sun, Y; Qian, Z; Luzin, V; Daniel, WJT; Zhang, M; Ding, SAdvanced high-strength steel is increasingly being used in automotive structural components due to its excellent strength-to-weight ratios. However, the variations of residual stresses magnitude in AHSS products are usually very complex and unpredictable due to the fabrication process and the material’s high strength. Consequently, unbalanced residual stresses are responsible for a series of product defects. Chain-die forming is a novel AHSS fabrication method which has the characteristics of preserving the material’s ductility maximally and also reducing the residual stresses in the product. In this study, the finite element method is employed to investigate the equivalent residual stresses (Von Mises) in Chain-die formed AHSS U-channels. Finite element simulation of roll forming of the same type as AHSS U-channel forming is performed to make a comparison of the residual stresses distribution characterizations in AHSS U-channels which are fabricated by roll forming and by Chain-die forming. The results indicate that the residual stresses in Chain-die formed U-channels stay at a very low level and are almost negligible. In the meanwhile, due to the bending, reverse bending and other unpredictable redundant deformation types in the roll forming process, the residual stresses are more significant than those of Chain-die formed AHSS channels. The comparison of the longitudinal strain developments of flange edges of roll formed and Chain-die formed U-channels is given to explain the differences between the residual stress distributions in the roll formed and Chain-die formed U-channels. This paper gives a comprehensive understanding of the characteristics of the residual stress distribution in Chain-die formed AHSS U-channels. It provides a clear evidence to illustrate the superiority of Chain-die forming in reducing the residual stresses in AHSS products. © The Authors
- ItemPositron annihilation lifetime study of radiation-damaged natural zircons(Elsevier B.V., 2016-04-01) Roberts, J; Gaugliardo, PR; Farnan, I; Zhang, M; Vance, ER; Davis, J; Karatchevtseva, I; Knott, RB; Mudie, ST; Buckman, J; Sullivan, JPZircons are a well-known candidate waste form for actinides and their radiation damage behaviour has been widely studied by a range of techniques. In this study, well-characterised natural single crystal zircons have been studied using Positron Annihilation Lifetime Spectroscopy (PALS). In some, but not all, of the crystals that had incurred at least half of the alpha-event damage of ∼1019 α/g required to render them structurally amorphous, PALS spectra displayed long lifetimes corresponding to voids of ∼0.5 nm in diameter. The long lifetimes corresponded to expectations from published Small-Angle X-ray Scattering data on similar samples. However, the non-observation by PALS of such voids in some of the heavily damaged samples may reflect large size variations among the voids such that no singular size can be distinguished or. Characterisation of a range of samples was also performed using scanning electron microscopy, optical absorption spectroscopy, Raman scattering and X-ray scattering/diffraction, with the degree of alpha damage being inferred mainly from the Raman technique and X-ray diffraction. The observed void diameters and intensities of the long lifetime components were changed somewhat by annealing at 700 °C; annealing at 1200 °C removed the voids entirely. The voids themselves may derive from He gas bubbles or voids created by the inclusion of small quantities of organic and hydrous matter, notwithstanding the observation that no voidage was evidenced by PALS in two samples containing hydrous and organic matter. © 2016 Elsevier B.V.
- ItemResidual stress in coatings produced by cold spray(Trans Tech Publications, 2013-11-21) Luzin, V; Spencer, K; Zhang, M; Matthews, NCold spray technology is used to produce metal coatings with a variety of functions, including surface corrosion protection, improvement of wear resistance, etc. Cold sprayed materials exhibit a wide range of behaviours resulting in large variation of spraying efficiency, coating properties, quality and performance in service. Residual stress, being a result and attribute of the deposition process, can be studied to test whether the coating is in tension/compression stress state and also to provide information about the thermo-mechanical history of the material during the deposition process. Residual stress distributions in a variety of coating materials have been studied by neutron diffraction. Through-thickness residual stress profiles show that the stress magnitude varies significantly and depends mainly on the mechanical properties of the coating material.
- ItemResults of an international comparison of activity measurements of 68Ge(Elsevier B. V., 2018-04) Cessna, JT; Fitzgerald, R; Zimmerman, BE; Laureano-Pérez, L; Bergeron, DE; van Wyngaardt, WM; Smith, ML; Jackson, TW; Howe, B; da Silva, CJ; Iwahara, A; da Cruz, PAL; Zhang, M; Liu, H; Liang, JC; Fréchou, C; Bobin, C; Cassette, P; Kossert, K; Nähle, O; Marganiec-Gałązka, J; Joseph, L; Ravindra, A; Kulkarni, DN; Yunoki, A; Sato, Y; Lee, KB; Lee, JM; Agusbudiman, A; Dziel, T; Listkowska, A; Tymiński, Z; Sahagia, M; Antohe, A; Ioan, MR; Luca, A; Krivosek, M; Ometakova, J; Javornik, A; Zalesakova, M; García-Toraño Martinez, E; Roteta, M; Mejuto, M; Nedjadi, Y; Juget, F; Yuan, MC; Yeh, CY; Yeltepe, E; Dirican, A; Keightley, JD; Pearce, AKAn international key comparison, identifier CCRI(II)-K2.Ge-68, has been performed. The National Institute of Standards and Technology (NIST) served as the pilot laboratory, distributing aliquots of a 68Ge/68Ga solution. Results for the activity concentration, CA, of 68Ge at a reference date of 12h00 UTC 14 November 2014 were submitted by 17 laboratories, encompassing many variants of coincidence methods and liquid-scintillation counting methods. The first use of 4π(Cherenkov)β-γ coincidence and anticoincidence methods in an international comparison is reported. One participant reported results by secondary methods only. Two results, both utilizing pure liquid-scintillation methods, were identified as outliers. Evaluation using the Power-Moderated Mean method results in a proposed Comparison Reference Value (CRV) of 621.7(11) kBq g−1, based on 14 results. The degrees of equivalence and their associated uncertainties are evaluated for each participant. Several participants submitted 3.6 mL ampoules to the BIPM to link the comparison to the International Reference System (SIR) which may lead to the evaluation of a Key Comparison Reference Value and associated degrees of equivalence. An international key comparison, identifier CCRI(II)-K2.Ge-68, has been performed. The National Institute of Standards and Technology (NIST) served as the pilot laboratory, distributing aliquots of a 68Ge/68Ga solution. Results for the activity concentration, CA, of 68Ge at a reference date of 12h00 UTC 14 November 2014 were submitted by 17 laboratories, encompassing many variants of coincidence methods and liquid-scintillation counting methods. The first use of 4π(Cherenkov)β-γ coincidence and anticoincidence methods in an international comparison is reported. One participant reported results by secondary methods only. Two results, both utilizing pure liquid-scintillation methods, were identified as outliers. Evaluation using the Power-Moderated Mean method results in a proposed Comparison Reference Value (CRV) of 621.7(11) kBq g−1, based on 14 results. The degrees of equivalence and their associated uncertainties are evaluated for each participant. Several participants submitted 3.6 mL ampoules to the BIPM to link the comparison to the International Reference System (SIR) which may lead to the evaluation of a Key Comparison Reference Value and associated degrees of equivalence. An international key comparison, identifier CCRI(II)-K2.Ge-68, has been performed. The National Institute of Standards and Technology (NIST) served as the pilot laboratory, distributing aliquots of a 68Ge/68Ga solution. Results for the activity concentration, CA, of 68Ge at a reference date of 12h00 UTC 14 November 2014 were submitted by 17 laboratories, encompassing many variants of coincidence methods and liquid-scintillation counting methods. The first use of 4π(Cherenkov)β-γ coincidence and anticoincidence methods in an international comparison is reported. One participant reported results by secondary methods only. Two results, both utilizing pure liquid-scintillation methods, were identified as outliers. Evaluation using the Power-Moderated Mean method results in a proposed Comparison Reference Value (CRV) of 621.7(11) kBq g−1, based on 14 results. The degrees of equivalence and their associated uncertainties are evaluated for each participant. Several participants submitted 3.6 mL ampoules to the BIPM to link the comparison to the International Reference System (SIR) which may lead to the evaluation of a Key Comparison Reference Value and associated degrees of equivalence. © 2021 Elsevier Ltd.
- ItemStabilization of triam(m)inechloridoplatinum complexes by oxidation to PtIV.(CSIRO Publishing, 2011-03-11) Daly, HL; Hall, MD; Failes, TW; Zhang, M; Foran, GJ; Hambley, TWPtIV analogues of the active end groups {PtClN3} of multinuclear Pt anticancer drugs have been investigated. The crystal structure of trans,mer-[PtCl(OH)2(dien)]Cl shows that the bond lengths are similar to those in the dihydroxidoplatinum(iv) analogue of cisplatin. The axial ligands are shown to be the predominant influence on reduction potentials with the dihydroxido complex trans,mer-[PtCl(OH)2(NH3)3]Cl being the most resistant to reduction. X-ray absorption near-edge spectroscopy is shown to be suitable for monitoring the oxidation state of these complexes and reveals that trans,mer-[PtCl(OH)2(NH3)3]+ survives for more than 2 h in cancer cells. © 2011, CSIRO Publishing