Browsing by Author "Wroński, S"

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Elastoplastic deformation and damage process in duplex steel studied using synchrotron and neutron diffraction
    (Scientific.Net, 2017-08-22) Zhao, YC; Joncour, LL; Baczmański, A; François, M; Wroński, S; Panicaud, B; Gadalińska, E; Braham, C; Buslaps, T; Paradowska, AM
    In the present work, the mechanical behavior of phases in duplex steel during tensile test was studied. Special interest was taken in the analysis of damage process just before failure. In this aim two diffraction methods: in-situ time of flight neutron diffraction and X-ray synchrotron diffraction were applied. Using diffraction data, the slip mechanism on crystallographic planes during plastic deformation was investigated. In the case of aged UR45N steel, it was found that significant softening caused by damage process was initiated in the ferritic phase. The lattice strains measured in situ by two above mentioned diffraction methods were compared with prediction of the self-consistent model. © 2021 by Trans Tech Publications Ltd.
  • No Thumbnail Available
    Item
    Study of stress localisation in polycrystalline grains using self-consistent modelling and neutron diffraction
    (Taylor & Francis Ltd, 2012-05-14) Baczmański, A; Gaj, A; Le Joncour, L; Wroński, S; François, M; Panicaud, B; Braham, C; Paradowska, AM
    The time-of-flight neutron diffraction technique and the elastoplastic self-consistent model were used to study the behaviour of single and multi-phase materials. Critical resolved shear stresses and hardening parameters in austenitic and austenitic?ferritic steels were found by analysing the evolution of the lattice strains measured during tensile tests. Special attention was paid to the changes of the grain stresses occurring due to transition from elastic to plastic deformation. Using a new method of data analysis, the variation of the stress localisation tensor as a function of macrostress was measured. The experimental results were successfully compared with model predictions for both phases of the duplex steel and also for the austenitic sample. © 2012, Taylor & Francis Group, an Informa Business.
  • No Thumbnail Available
    Item
    Study of stresses in texture components using neutron diffraction
    (Trans Tech Publications, 2013-09-01) Baczmański, A; Gadalińska, E; Wroński, S; Joncour, LL; Panicaud, B; François, M; Braham, C; Klosek, V; Paradowska, AM
    In this work a new method for analysis of neutron diffraction results obtained during “in situ” tensile load is proposed and tested. The methodology is based on the measurements of lattice strains during “in situ” tensile test for several hkl reflections and for different orientations of the sample with respect to the scattering vector. As the result the full stress tensor for preferred texture orientations in function of applied stress can be determined with help of crystallite group method. The experimental data are presented and compared with self-consistent model calculations performed for groups of grains corresponding to the measured hkl reflections. © 2014, Trans Tech Publications.