Browsing by Author "Williams, J"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Characterisation of metakaolin-based geopolymers using beam-based and conventional PALS
    (Institute of Physics, 2010-08-01) Guagliardo, P; Roberts, J; Vance, ER; Weed, R; Sergeant, AD; Howie, A; Wilkie, P; Went, M; Sullivan, J; Williams, J; Samarin, S; Buckman, SJ
    The nano-porosity of metakaolin-based geopolymers and the effect of heat-treatment on porosity have been studied with conventional and beam-based positron annihilation lifetime spectroscopy (PALS). Conventional PALS found significant nano-porosity in the geopolymers, as indicated by the presence in the PALS spectrum of two long lifetime components, τ3 = 1.58 ns and τ4 = 47 ns, associated with pore diameters of approximately 0.5 and 3 nm respectively. The lifetime of the shorter component was found to decrease monotonically with successive heat treatments of 300°C and 600°C. Beam-based PALS, conducted at 5 keV, also indicated two long lifetime components, τ3 = 4.84 ns and τ4 = 54.6 ns. These are significantly longer than those observed by conventional PALS and the monotonic decrease of τ3 with successive heat treatments was not observed. As the beam-based PALS probed only the near-surface region, with an average implantation depth of about 350 nm, these results suggest that the near-surface structure may vary significantly from that of the bulk. This could be an inherent property of the samples or an artefact caused by surface effects or sample outgassing. © Copyright 2020 IOP Publishing
  • Thumbnail Image
    Item
    Clay particles - potential of positron annihilation lifetime spectroscopy (PALS) for studying interlayer spacing
    (Institute of Physics, 2010-08-01) Fong, N; Guagliardo, P; Williams, J; Musumeci, AW; Martin, DJ; Smith, SV
    Characterisation of clays is generally achieved by traditional methods, such as X-ray diffraction (XRD) and transmission electron microscopy (TEM). However, clays are often difficult to characterise due to lack of long-range order, thus these tools are not always reliable. Because interlayer spacing in clays can be adjusted to house molecules, there is growing interest to use these materials for drug delivery. Positron annihilation lifetime spectroscopy (PALS) was examined as an alternative tool to characterise a series of well-known clays. XRD of two layered double hydroxides; MgAl-LDH and MgGd-LDH, natural hectorite, fluoromica and laponite, and their PALS spectra were compared. XRD data was used to calculate the interlayer d- spacing in these materials and results show a decrease in interlayer spacing as the heavy metal ions are substituted for those of large ionic radii. Similar results were obtained for PALS data. This preliminary study suggests PALS has potential as a routine tool for characterising clay particles. Further work will examine the sensitivity and reliability of PALS to percent of metal doping and hydration in clay microstructure. © 2020 IOP Publishing
  • Thumbnail Image
    Item
    Study of porosity of synthetic polymer nanoparticles using PALS
    (Institute of Physics, 2010-08-01) Pham, B; Guagliardo, P; Williams, J; Samarin, S; Smith, SV
    Positron annihilation lifetime spectroscopy (PALS) has been used to study the free volume in dry synthetic polymer nanoparticles of various sizes. A series of poly(styrene/divinyl benzene) particles with diameters in the range of 100 to 500 nm were synthesized and then carefully chemically treated using the sulfonation process, to increase their porosity. The particles were characterised by Scanning Electron Microscopy (SEM), light scattering and PALS. Light scattering gave larger size for the treated particles, reflecting the hydration effect and therefore the increase in porosity. PALS spectra of untreated and treated particles gave four and three life-time components, respectively. Analysis by PAScual version 1.3.0 program indicated there was a reduction in the intensity and the type of the micropores in the treated particles. The data suggest PALS is a sensitive tool for detecting changes in microporosity in particles. The conflicting results obtained for light scattering compared to PALS for chemically treated particles is difficult to resolve and suggests sample preparation of polymeric materials for PALS is the critical factor.