Browsing by Author "Li, YJ"
Now showing 1 - 6 of 6
Results Per Page
Sort Options
- ItemA database of ionic transport characteristics for over 29 000 inorganic compounds(Wiley, 2020-06-25) Zhang, LW; He, B; Zhao, Q; Zou, ZY; Chi, ST; Mi, PH; Ye, AJ; Li, YJ; Wang, D; Avdeev, M; Adams, S; Shi, STransport characteristics of ionic conductors play a key role in the performance of electrochemical devices such as solid-state batteries, solid-oxide fuel cells, and sensors. Despite the significance of the transport characteristics, they have been experimentally measured only for a very small fraction of all inorganic compounds, which limits the technological progress. To address this deficiency, a database containing crystal structure information, ion migration channel connectivity information, and 3D channel maps for over 29 000 inorganic compounds is presented. The database currently contains ionic transport characteristics for all potential cation and anion conductors, including Li+, Na+, K+, Ag+, Cu(2)+, Mg2+, Zn2+, Ca2+, Al3+, F−, and O2−, and this number is growing steadily. The methods used to characterize materials in the database are a combination of structure geometric analysis based on Voronoi decomposition and bond valence site energy (BVSE) calculations, which yield interstitial sites, transport channels, and BVSE activation energy. The computational details are illustrated on several typical compounds. This database is created to accelerate the screening of fast ionic conductors and to accumulate descriptors for machine learning, providing a foundation for large-scale research on ion migration in inorganic materials.© 1999-2021 John Wiley & Sons, Inc.
- ItemIdentifying chemical factors affecting reaction kinetics in Li-air battery via ab initio calculations and machine learning(Elsevier, 2021-03-01) Wang, AP; Zou, ZY; Wang, D; Liu, Y; Li, YJ; Wu, JM; Avdeev, M; Shi, SRedox mediators are promised to thermodynamically resolve the cathode irreversibility of Li-air battery. However, the sluggish chemical reaction between mediators and discharge products severely restrains fast charging. Here, we combine ab initio calculations and machine learning method to investigate the reaction kinetics between LiOH and I2, and demonstrate the critical role of the disorder degree of LiOH and the solvent effect. The Li+ desorption is identified as the rate determining step (rds) of the reaction. While LiOH turns from the crystalline to disordered/amorphous structure, the rds energy barrier will be reduced by ∼500 meV. The functional group of the solvent is detected as the key to regulating the solvation effect and phosphate-based solvent is predicted to accelerate the decomposition kinetics most with the strongest solvation capability. These findings indicate that the faster reaction kinetics between mediators and the discharge products can be achieved by rational discharge product structure regulation and appropriate solvent selection. © 2020 Elsevier B.V.
- ItemIdentifying migration channels and bottlenecks in monoclinic NASICON-type solid electrolytes with hierarchical ion-transport algorithms(Wiley, 2021-09-07) Zou, Z; Ma, N; Wang, AP; Ran, YB; Song, T; He, B; Ye, AJ; Mi, PH; Zhang, LW; Zhou, H; Jiao, Y; Liu, JP; Wang, D; Li, YJ; Avdeev, M; Shi, SMonoclinic natrium superionic conductors (NASICON; Na3Zr2Si2PO12) are well-known Na-ion solid electrolytes which have been studied for 40 years. However, due to the low symmetry of the crystal structure, identifying the migration channels of monoclinic NASICON accurately still remains unsolved. Here, a cross-verified study of Na+ diffusion pathways in monoclinic NASICON by integrating geometric analysis of channels and bottlenecks, bond-valence energy landscapes analysis, and ab initio molecular dynamics simulations is presented. The diffusion limiting bottlenecks, the anisotropy of conductivity, and the time and temperature dependence of Na+ distribution over the channels are characterized and strategies for improving both bulk and total conductivity of monoclinic NASICON-type solid electrolytes are proposed. This set of hierarchical ion-transport algorithms not only shows the efficiency and practicality in revealing the ion transport behavior in monoclinic NASICON-type materials but also provides guidelines for optimizing their conductive properties that can be readily extended to other solid electrolytes. © 2021 Wiley-VCH GmbH
- ItemRelationships between Na+ distribution, concerted migration, and diffusion properties in rhombohedral NASICON(Wiley, 2020-06-24) Zou, ZY; Ma, N; Wang, AP; Ran, YB; Song, T; Jiao, Y; Zhou, H; Shi, W; He, B; Wang, D; Li, YJ; Avdeev, M; Shi, SRhombohedral NaZr2(PO4)3 is the prototype of all the NASICON-type materials. The ionic diffusion in these rhombohedral NASICON materials is highly influenced by the ionic migration channels and the bottlenecks in the channels which have been extensively studied. However, no consensus is reached as to which one is the preferential ionic migration channel. Moreover, the relationships between the Na+ distribution over the multiple available sites, concerted migration, and diffusion properties remain elusive. Using ab initio molecular dynamics simulations, here it is shown that the Na+ ions tend to migrate through the Na1–Na3–Na2–Na3–Na1 channels rather than through the Na2–Na3–Na3–Na2 channels. There are two types of concerted migration mechanisms: two Na+ ions located at the adjacent Na1 and Na2 sites can migrate either in the same direction or at an angle. Both mechanisms exhibit relatively low migration barriers owing to the potential energy conversion during the Na+ ions migration process. Redistribution of Na+ ions from the most stable Na1 sites to Na2 on increasing Na+ total content further facilitates the concerted migration and promotes the Na+ ion mobility. The work establishes a connection between the Na+ concentration in rhombohedral NASICON materials and their diffusion properties. © 1999-2021 John Wiley & Sons, Inc.
- ItemSoftware for evaluating ionic conductivity of inorganic–polymer composite solid electrolytes(American Association for the Advancement of Science, 2023-01) Ding, Y; He, B; Wang, D; Avdeev, M; Li, YJ; Shi, SInorganic–polymer composite solid electrolytes (IPCSEs) obtained by filling the polymer matrix with inorganic materials usually have higher ionic conductivity compared with individual phases. This important increase in ionic conductivity is explained in terms of the new percolation paths formed by the highly conductive interface between inorganic filler and polymer. The conduction in such systems can be investigated using the effective medium theory (EMT) and random resistance model (RRM). EMT can be used to analyze the effect of filler size on the ionic conductivity of disordered IPCSEs, while RRM can describe the composites with inorganic fillers of various shapes (nano-particles, nano-wires, nano-sheets, and nano-networks) in ordered or disordered arrangement. Herein, we present software evaluating the ionic conductivity in IPCSEs by combining EMT and RRM. The approach is illustrated by considering the size, shapes, and arrangements of inorganic fillers. The ionic conductivities of different types of IPCSEs are predicted theoretically and found in good agreement with the experimental values. The software can be used as an auxiliary tool to design composite electrolytes. © 2023 Yuqing Ding et al. Exclusive licensee Beijing Institute of Technology Press. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution License 4.0 (CC BY 4.0)
- ItemUnderstanding the Li diffusion mechanism and positive effect of current collector volume expansion in anode free batteries(IOP Publishing, 2020-03-09) Zhuang, Y; Zou, ZY; Lu, B; Li, YJ; Wang, D; Avdeev, M; Shi, SIn anode free batteries (AFBs), the current collector acts as anode simultaneously and has large volume expansion which is generally considered as a negative effect decreasing the structural stability of a battery. Moreover, despite many studies on the fast lithium diffusion in the current collector materials of AFB such as copper and aluminum, the involved Li diffusion mechanism in these materials remains poorly understood. Through first-principles calculation and stress-assisted diffusion equations, here we study the Li diffusion mechanism in several current collectors and related alloys and clarify the effect of volume expansion on Li diffusion respectively. It is suggested that due to the lower Li migration barriers in aluminum and tin, they should be more suitable to be used as AFB anodes, compared to copper, silver, and lead. The Li diffusion facilitation in copper with a certain number of vacancies is proposed to explain why the use of copper with a thickness ≤ 100 nm as the protective coating on the anode improves the lifetime of the batteries. We show that the volume expansion has a positive effect on Li diffusion via mechanical–electrochemical coupling. Namely, the volume expansion caused by Li diffusion will further induce stress which in turn affects the diffusion. These findings not only provide in-depth insight into the operating principle of AFBs, but also open a new route toward design of improved anode through utilizing the positive effect of mechanical–electrochemical coupling. © 2020 Chinese Physical Society and IOP Publishing Ltd