Browsing by Author "Lacombe, J"

Now showing 1 - 1 of 1
  • No Thumbnail Available
    Item
    Alteration of cold crucible melter titanate-based ceramics: comparison with hot-pressed titanate-based ceramic
    (Materials Research Society, 1997) Advocat, T; Leturcq, G; Lacombe, J; Berger, G; Day, RA; Hart, KP; Vernaz, E; Bonnetier, A
    Synroc ceramics were synthesized in an induction-heated cold crucible at laboratory scale (1 kg) from an oxide mixture, and at industrial prototype scale (45 kg) from Synroc previously produced by sintering under load at high temperature. After melting, both materials contained the major phases of Synroc-C. The chemical durability of both melted materials, as determined by static leaching of powder samples in initially pure water at 90°C with an SA/V ratio of 20000m−1, was equivalent to that of conventional hot-pressed Synroc-C. Cerium, used in this investigation to simulate the presence of tri-and tetravalent actinides, was found in steady-state concentrations on the order of 1 ppb (i.e. NL(Ce) ≤ 10−6 g·m−2). The concentration in the leachates was independent of the initial CeO2 content of the Synroc (at least up to 10 wt%); moreover, it is similar to the results obtained with hot-pressed Synroc-C specifically formulated for conditioning long-lived actinides. © Materials Research Society 1997