Browsing by Author "Hua, WB"

Now showing 1 - 4 of 4
  • No Thumbnail Available
    Item
    Development and investigation of a NASICON‐type high‐voltage cathode material for high‐power sodium‐ion batteries
    (Wiley, 2020-02-03) Chen, MZ; Hua, WB; Xiao, J; Cortie, DL; Guo, XD; Wang, E; Gu, QF; Hu, Z; Indris, S; Wang, XL; Chou, SL; Dou, SX
    Herein, we introduce a 4.0 V class high‐voltage cathode material with a newly recognized sodium superionic conductor (NASICON)‐type structure with cubic symmetry (space group P213), Na3V(PO3)3N. We synthesize an N‐doped graphene oxide‐wrapped Na3V(PO3)3N composite with a uniform carbon coating layer, which shows excellent rate performance and outstanding cycling stability. Its air/water stability and all‐climate performance were carefully investigated. A near‐zero volume change (ca. 0.40 %) was observed for the first time based on in situ synchrotron X‐ray diffraction, and the in situ X‐ray absorption spectra revealed the V3.2+/V4.2+ redox reaction with high reversibility. Its 3D sodium diffusion pathways were demonstrated with distinctive low energy barriers. Our results indicate that this high‐voltage NASICON‐type Na3V(PO3)3N composite is a competitive cathode material for sodium‐ion batteries and will receive more attention and studies in the future. © 2019Wiley-VCHVerlagGmbH&Co
  • No Thumbnail Available
    Item
    Development and investigation of a NASICON‐type high‐voltage cathode material for high‐power sodium‐ion batteries
    (Wiley, 2020-02-03) Chen, MZ; Hua, WB; Xiao, J; Cortie, DL; Guo, XD; Wang, E; Gu, QF; Hu, Z; Indris, S; Wang, XL; Chou, SL; Dou, SX
    Herein, we introduce a 4.0 V class high‐voltage cathode material with a newly recognized sodium superionic conductor (NASICON)‐type structure with cubic symmetry (space group P213), Na3V(PO3)3N. We synthesize an N‐doped graphene oxide‐wrapped Na3V(PO3)3N composite with a uniform carbon coating layer, which shows excellent rate performance and outstanding cycling stability. Its air/water stability and all‐climate performance were carefully investigated. A near‐zero volume change (ca. 0.40 %) was observed for the first time based on in situ synchrotron X‐ray diffraction, and the in situ X‐ray absorption spectra revealed the V3.2+/V4.2+ redox reaction with high reversibility. Its 3D sodium diffusion pathways were demonstrated with distinctive low energy barriers. Our results indicate that this high‐voltage NASICON‐type Na3V(PO3)3N composite is a competitive cathode material for sodium‐ion batteries and will receive more attention and studies in the future. Copyright © 1999-2024 John Wiley & Sons, Inc or related companies.
  • Thumbnail Image
    Item
    NASICON-type air-stable and all-climate cathode for sodium-ion batteries with low cost and high-power density
    (Springer Nature, 2019-04-01) Chen, MZA; Hua, WB; Xiao, J; Cortie, DL; Chen, W; Wang, E; Hu, Z; Gu, QF; Wang, XL; Indris, S; Chou, SL; Dou, SX
    The development of low-cost and long-lasting all-climate cathode materials for the sodium ion battery has been one of the key issues for the success of large-scale energy storage. One option is the utilization of earth-abundant elements such as iron. Here, we synthesize a NASICON-type tuneable Na4Fe3(PO4)2(P2O7)/C nanocomposite which shows both excellent rate performance and outstanding cycling stability over more than 4400 cycles. Its air stability and all-climate properties are investigated, and its potential as the sodium host in full cells has been studied. A remarkably low volume change of 4.0% is observed. Its high sodium diffusion coefficient has been measured and analysed via first-principles calculations, and its three-dimensional sodium ion diffusion pathways are identified. Our results indicate that this low-cost and environmentally friendly Na4Fe3(PO4)2(P2O7)/C nanocomposite could be a competitive candidate material for sodium ion batteries. - © Open Access This article is licensed under a Creative Commons Attribution 4.0
  • No Thumbnail Available
    Item
    A novel graphene oxide wrapped Na2Fe2(SO4)3/C cathode composite for long life and high energy density sodium‐ion batteries
    (Wiley, 2018-08-06) Chen, MZ; Cortie, DL; Hu, Z; Jin, H; Wang, S; Gu, QF; Hua, WB; Wang, E; Lai, WH; Chen, L; Chou, SL; Wang, XL; Dou, SX
    The cathode materials in the Na‐ion battery system are always the key issue obstructing wider application because of their relatively low specific capacity and low energy density. A graphene oxide (GO) wrapped composite, Na2Fe2(SO4)3@C@GO, is fabricated via a simple freeze‐drying method. The as‐prepared material can deliver a 3.8 V platform with discharge capacity of 107.9 mAh g−1 at 0.1 C (1 C = 120 mA g−1) as well as offering capacity retention above 90% at a discharge rate of 0.2 C after 300 cycles. The well‐constructed carbon network provides fast electron transfer rates, and thus, higher power density also can be achieved (75.1 mAh g−1 at 10 C). The interface contribution of GO and Na2Fe2(SO4)3 is recognized and studied via density function theory calculation. The Na storage mechanism is also investigated through in situ synchrotron X‐ray diffraction, and pseudocapacitance contributions are also demonstrated. The diffusion coefficient of Na+ ions is around 10−12–10−10.8 cm2 s−1 during cycling. The higher working voltage of this composite is mainly ascribed to the larger electronegativity of the element S. The research indicates that this well‐constructed composite would be a competitive candidate as a cathode material for Na‐ion batteries. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA.