Browsing by Author "Han, MH"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    A comprehensive picture of the current rate dependence of the structural evolution of P2-Na2/3Fe2/3Mn1/3O2
    (Royal Society of Chemistry, 2015-09-02) Sharma, N; Han, MH; Pramudita, JC; Gonzalo, E; Brand, HEA; Rojo, T
    Cathodes that feature a layered structure are attractive reversible sodium hosts for ambient temperature sodium-ion batteries which may meet the demands for large-scale energy storage devices. However, crystallographic data on these electrodes are limited to equilibrium or quasi-equilibrium information. Here we report the current-dependent structural evolution of the P2-Na2/3Fe2/3Mn1/3O2 electrode during charge/discharge at different current rates. The structural evolution is highly dependent on the current rate used, e.g., there is significant disorder in the layered structure near the charged state at slower rates and following the cessation of high-current rate cycling. At moderate and high rates this disordered structure does not appear. In addition, at the slower rates the disordered structure persists during subsequent discharge. In all rates examined, we show the presence of an additional two-phase region that has not been observed before, where both phases maintain P63/mmc symmetry but with varying sodium contents. Notably, most of the charge at each current rate is transferred via P2 (P63/mmc) phases with varying sodium contents. This illustrates that the high-rate performance of these electrodes is in part due to the preservation of the P2 structure and the disordered phases appear predominantly at lower rates. Such current-dependent structural information is critical to understand how electrodes function in batteries which can be used to develop optimised charge/discharge routines and better materials. © 2015 The Royal Society of Chemistry. This article is Open Access.
  • No Thumbnail Available
    Item
    High-performance P2-phase Na2/3Mn0. 8Fe0. 1Ti0. 1O2 cathode material for ambient-temperature sodium-ion batteries
    (American Chemical Society, 2015-11-25) Han, MH; Gonzalo, E; Sharma, N; López del Amo, JM; Armand, M; Avdeev, M; Saiz Garitaonandia, JJ; Rojo, T
    High-performance Mn-rich P2-phase Na2/3Mn0.8Fe0.1Ti0.1O2 is synthesized by a ceramic method, and its stable electrochemical performance is demonstrated. 23Na solid-state NMR confirms the substitution of Ti4+ ions in the transition metal oxide layer and very fast Na+ mobility in the interlayer space. The pristine electrode delivers a second charge/discharge capacity of 146.57/144.16 mA·h·g–1 and retains 95.09% of discharge capacity at the 50th cycle within the voltage range 4.0–2.0 V at C/10. At 1C, the reversible specific capacity still reaches 99.40 mA·h·g–1, and capacity retention of 87.70% is achieved from second to 300th cycle. In addition, the moisture-exposed electrode reaches reversible capacities of more than 130 and 80 mA·h·g–1 for C/10 and 1C, respectively, with excellent capacity retention. The correlation between overall electrochemical performance of both electrodes and crystal structural characteristics are investigated by neutron powder diffraction. The stability of pristine electrode’s crystallographic structure during the charge/discharge process has been investigated by in situ X-ray diffraction, where only a solid solution reaction occurs within the given voltage range except for a small biphasic mechanism occurring at or below 2.2 V during the discharge process. The relatively small substitution (20%) at the transition metal site leads to stable electrochemical performance, which is in part derived from the structural stability during electrochemical cycling. Therefore, the small cosubstitution (e.g., with Ti and Fe) route suggests a possible new scope for the design of sodium-ion battery electrodes that are suitable for long-term cycling. © 2015 American Chemical Society
  • No Thumbnail Available
    Item
    Moisture exposed layered oxide electrodes as Na-ion battery cathodes
    (Royal Society of Chemistry, 2016-11-09) Han, MH; Sharma, N; Gonzalo, E; Pramudita, JC; Brand, HEA; López del Amo, JM; Rojo, T
    Mn-rich layered oxides of P2 Na2/3Mn0.8Fe0.1Ti0.1O2 have been shown to exhibit a remarkably stable electrochemical performance even after exposure to moisture for extended periods of time. Here, a detailed investigation of the electrochemical performance of pristine, protonated, and hydrated electrodes is reported. Neutron powder diffraction and 23Na NMR are employed in order to correlate the overall electrochemical performance of each electrode with that of the as-synthesized crystal structure. The effects of proton and water (or OH) moieties on the Na+ layers are discussed based on the electrochemical performance of each phase. The complete structural evolution of the protonated and pristine P2 Na2/3Mn0.8Fe0.1Ti0.1O2 electrodes during charge/discharge is determined via in situ synchrotron X-ray diffraction. The protonated phase at the potential cut-offs (1.5-4.2 and 2-4 V) and the applied currents used shows a predominantly solid-solution reaction with little evidence of a secondary phase while the pristine phase shows the formation of secondary phases and typically better electrochemical capacities. Therefore, the formation of the secondary phase, in part, enhances capacity in this system. Thus moisture exposure (and subsequent treatment) of generally P2 electrodes can lead to significantly different structural evolution during charge/discharge reactions and hence observed capacities. © 2016 The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    The unique structural evolution of the O3-phase Na2/3Fe2/3Mn1/3O2 during high rate charge/discharge: a sodium-centred perspective
    (John Wiley & Sons, Inc, 2015-08-17) Sharma, N; Gonzalo, E; Pramudita, JC; Han, MH; Brand, HEA; Hart, JN; Pang, WK; Guo, ZP; Rojo, T
    The development of new insertion electrodes in sodium-ion batteries requires an in-depth understanding of the relationship between electrochemical performance and the structural evolution during cycling. To date in situ synchrotron X-ray and neutron diffraction methods appear to be the only probes of in situ electrode evolution at high rates, a critical condition for battery development. Here, the structural evolution of the recently synthesized O3-phase of Na2/3Fe2/3Mn1/3O2 is reported under relatively high current rates. The evolution of the phases, their lattice parameters, and phase fractions, and the sodium content in the crystal structure as a function of the charge/discharge process are shown. It is found that the O3-phase persists throughout the charge/discharge cycle but undergoes a series of two-phase and solid-solution transitions subtly modifying the sodium content and atomic positions but keeping the overall space-group symmetry (structural motif). In addition, for the first time, evidence of a structurally characterized region is shown that undergoes two-phase and solid-solution phase transitions simultaneously. The Mn/Fe-O bond lengths, c lattice parameter evolution, and the distance between the Mn/FeO6 layers are shown to concertedly change in a favorable manner for Na+ insertion/extraction. The exceptional electrochemical performance of this electrode can be related in part to the electrode maintaining the O3-phase throughout the charge/discharge process. © 2015 Wiley-VCH Verlag GmbH & Co.