Browsing by Author "Appelqvist, IAM"
Now showing 1 - 6 of 6
Results Per Page
Sort Options
- ItemEffect of acid dextrinisation on enzyme-resistant starch content in extruded maize starch(Elsevier, 2010-05) Htoon, AK; Uthayakumaran, S; Piyasiri, U; Appelqvist, IAM; Lopez-Rubio, A; Gilbert, EP; Mulder, RJThe enzyme-resistant starch (ERS) content in processed high amylose and regular maize starches has been studied, with and without acid dextrinisation. The physicochemical and structural characteristics of the starches were analysed using a variety of techniques. The increase in ERS in high amylose maize starch with dextrinisation was related to the formation of a critical molecular weight fraction (MW ~ 20,000) that could rearrange structurally. Further dextrinisation reduced the processed starch MW to below where it could still form ERS. Regular maize starch containing less than 30% amylose did not increase its resistance to amylase digestibility with acid dextrinisation, probably due to impairment of amylose rearrangement by the numerous branched amylopectin chains. The ERS, which is likely to form during the enzyme-digestion process, is a linear molecule with a maximum degree of polymerisation (DP) of 30, irrespective of the starch source, processing conditions applied or type and amount of acid used. © 2010, Elsevier Ltd.
- ItemEffects of thermal denaturation on the solid-state structure and molecular mobility of glycinin(American Chemical Society, 2011-06-01) Huson, MG; Strounina, EV; Kealley, CS; Rout, MK; Church, JS; Appelqvist, IAM; Gidley, MJ; Gilbert, EPThe effects of moisture and thermal denaturation on the solid-state structure and molecular mobility of soy glycinin powder were investigated using multiple techniques that probe over a range of length and time scales. In native glycinin, increased moisture resulted in a decrease in both the glass transition temperature and the denaturation temperature. The sensitivity of the glass transition temperature to moisture is shown to follow the Gordon-Taylor equation, while the sensitivity of the denaturation temperature to moisture is modeled using Flory's melting point depression theory. While denaturation resulted in a loss of long-range order, the principal conformational structures as detected by infrared are maintained. The temperature range over which the glass to rubber transition occurred was extended on the high temperature side, leading to an increase in the midpoint glass transition temperature and suggesting that the amorphous regions of the newly disordered protein are less mobile. C-13 NMR results supported this hypothesis. © 2011, American Chemical Society
- ItemHydration induced structural changes in native, denatured and protected soy glycinin (11s)(Institute of Food Technologists, 2007-07) Appelqvist, IAM; Rout, MK; Chanvrier, H; Dezfouli, M; Kelly, M; Htoon, AK; Kealley, CS; Gilbert, EP; Strounina, E; Whittaker, AK; Gidley, MJ; Lillford, PJProteins and other biomolecules undergo a dynamic transition to a glass-like solid state with small atomic fluctuations. This dynamic transition can inhibit biological function and alter their material properties.
- ItemInfluence of storage conditions on the structure, thermal behavior, and formation of enzyme-resistant starch in extruded starches(American Chemical Society, 2007-10-26) Chanvrier, H; Uthayakumaran, S; Appelqvist, IAM; Gidley, MJ; Gilbert, EP; Lopez-Rubio, AStarch structures from an extrusion process were stored at different temperatures to allow for molecular rearrangement (retrogradation); their thermal characteristics (DSC) and resistance to amylase digestion were measured and compared. The structure of four native and processed starches containing different amylose/amylopectin compositions (3.5, 30.8, 32, and 80% amylose content, respectively) before and after digestion was studied with small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD). Rearrangement of the amylose molecules was observed for each storage condition as measured by the DSC endotherm at around 145°C. The crystalline organization of the starches after processing and storage was qualitatively different to that of the native starches. However, there was no direct correlation between the initial crystallinity and the amount of enzyme-resistant starch (ERS) measured after in vitro digestion, and only in the case of high-amylose starch did the postprocess conditioning used lead to a small increase in the amount of starch remaining after the enzymatic treatment. From the results obtained, it can be concluded that retrograded amylose is not directly correlated with ERS and alternative mechanisms must be responsible for ERS formation. © 2007, American Chemical Society
- ItemProcessing of novel elevated amylose wheats: functional properties and starch digestibility of extruded products(American Chemical Society, 2007-11-15) Chanvrier, H; Appelqvist, IAM; Bird, AR; Gilbert, EP; Htoon, AK; Li, ZY; Lillford, PJ; Lopez-Rubio, A; Morell, MK; Topping, DLDifferent types of novel wheat lines with different starch contents and amylose/amylopectin ratios, relating to defined alterations in the number and activity of starch synthase IIa genes, were processed by pilot-plant extrusion. Two types of products were produced: pure wholemeal products and breakfast cereals made from wholemeal/maize blends. Lower apparent shear viscosity was obtained in the extruder with lower starch content and higher amylose/amylopectin ratio flours (SSIIa-deficient line). The bulk density of the products decreased with increasing extrusion temperature and was always higher for the triple-null line. The bulk density was not completely explained by the melt shear viscosity, suggesting the importance of the fillers (fibers, brans) in the process of expansion and structure acquisition. The different mechanical properties were explained by the density and by the material constituting the cell walls. Enzyme-resistant starch (RS) content and hydrolysis index (HI) were not correlated to the extrusion temperature, but RS was higher in pure wholemeal products and in the SSIIa-deficient line. These results are discussed in terms of starch molecular architecture and product microstructure. © American Chemical Society
- ItemStructure and molecular mobility of soy glycinin in the solid state(American Chemical Society, 2008-10) Kealley, CS; Rout, MK; Dezfouli, MR; Strounina, E; Whittaker, AK; Appelqvist, IAM; Lillford, PJ; Gilbert, EP; Gidley, MJWe report a multitechnique study of structural organization and molecular mobility for soy glycinin at a low moisture content (<30% w/w) and relate these to its glass-to-rubber transition. Small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy are used to probe structure and mobility on different length and time scales. NMR (similar to 10(-6) to 10(-3) s) reveals transitions at a higher moisture content (> 17%) than DSC or SAXS, which sample for much longer times (similar to 10 to 10(3) s) and where changes are detected at > 13% water content at 20 degrees C. The mobility transitions are accompanied by small changes in unit-cell parameters and IR band intensities and are associated with the enhanced motion of the polypeptide backbone. This study shows how characteristic features of the ordered regions of the protein (probed by SAXS and FTIR) and mobile segments (probed by NMR and DSC) can be separately monitored and integrated within a mobility transformation framework. © 2008, American Chemical Society